10-04-2022 06:30 AM - edited 10-18-2023 07:20 AM
ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options
to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake
ocpak/octools
FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter
Test BIOSes:
new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
DOCP/EXPO Tweaked: (for simple timings tightening)
strixe-e 1515
for crosshair and strix e-e:
explanation of segment2 Loadline:
customize a heterogenous loadline for a dual segment workload range.
example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.
Adds for x3d
dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok
Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4
Can combine multiple algos for ccd priority so combinations are wide
works on non x3d too but of course senseless on it. detailed explanation here.
Solved! Go to Solution.
11-15-2022 10:02 PM
Poloasis wrote:
Is the 0805 beta same as the official release. Should i reflash 0805 from official release?
11-16-2022 06:37 AM
11-17-2022 01:17 AM
11-17-2022 01:49 AM
F1Aussie wrote:
I still seem to have internet issues on 0805 but I am not sure if bios related or not. I have internet hard wired but when I turn wifi off I lose internet connection. If I go to settings it says ethernet is not connected but then it also gives me the option to disable it, which makes me think it is connected. Not sure what to do here, any tips?
11-17-2022 09:12 AM
F1Aussie wrote:
I still seem to have internet issues on 0805 but I am not sure if bios related or not. I have internet hard wired but when I turn wifi off I lose internet connection. If I go to settings it says ethernet is not connected but then it also gives me the option to disable it, which makes me think it is connected. Not sure what to do here, any tips?
11-17-2022 03:50 AM
11-17-2022 04:24 AM
11-17-2022 11:14 AM
So far our conclusion is also that the issue is rather rooted in the firmware (BIOS) handling the onboard sensor chip incorrectly than a bug in AIDA64.
11-19-2022 12:01 AM
Qwinn wrote:
Shamino, does BIOS 0805 attempt to fix the issue that causes AIDA 64 sensors to lock CPU package temp? Here's a link from AIDA 64 forums discussing the issue:
https://forums.aida64.com/topic/10456-7950x-cpu-temp-issue/
The AIDA64 folks state near the end of that thread that they believe the issue lies in the ASUS bios:
Wherever the issues is, it really needs to be resolved. When that temp gets locked, the fans on my Ryujin II CPU cooler (and I suspect the internal CPU thermal limiters) obey the locked temperature, even if other sensors like those of HWINFO64 can still read it correctly. I can easily see that issue burning out some CPUs. AIDA64 sensors are unusable until that gets resolved.
11-17-2022 09:25 PM