Download here This update includes new features and several bug fixes to improve performance and functionality.New Features:1. Optimized brightness performance for levels below 128 grayscale in 10-bit color depth.2. Added Adjustable HDR settings, all...
Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...
Hello, I bought this monitor and I always see overshoot / changing color in dark scenes. I'm about to return monitor bc this is unusable bug or tandem characteristics.I have question: Can Asus repair overshoot on AQWMG in new MCM103 firmware like it ...
Hi All, I just bought a new ASUS 32" OLED monitor XG32UCWMG, and I have run into this problem: I connect it to my new Asus Strix Scar 18 laptop, and every time after power-on the laptop from its hibernation, the display swatches back to the laptop i...
If yourASUS_XG32UCWMG Oled anti flicker in image menuis greyed out, this is because you are using the HDMI port.The option can be selected to off/low/med/high if you are using a display port input.At least this is the case with my RTX 4090.Hope that ...
Hi,I would like to reopen a previous thread https://rog-forum.asus.com/t5/rog-series-monitors-pg-xg/dp-2-1-not-reaching-full-80-gbs-bandwidth/td-p/1104880I recently bought the PG27UCDM screen and I experience the same problem as in the above thread.@...
The PG27UCDM is specified with a G‑SYNC/VRR range of 48–240 Hz. However, Low Framerate Compensation (LFC) is engaging at 60 Hz, even though the VRR floor is listed as 48 Hz. This behavior can be observed directly using the PG27UCDM’s built‑in OSD FPS...
I'm sorry for the very specific weird question, it's just that I'm really pissed, have waited for months for the XG27AQWMG to launch in my country (Romania), only for it to be 100€ more expensive than the average price of a majority of EU countries, ...
I’ve recently bought the PG32UCDMR but am running into some calibration issues which I dint encounter on the PG32UCDM which I also have. Specifically the windows hdr calibration tool in hdr game mode is already clipping around 500 nits instead of ~10...
Hardware Configuration:Laptop: ROG Strix G17 (G713QR)Monitor: ROG Strix XG32VCConnectivity Tested: USB-C to USB-C AND DisplayPort + USB Type-B upstream.OS: Windows 11The Issue (Technical Details): There appears to be a disconnect between the HAL vers...
Anyone know how to remove the stand from the base for the PG279Q?
if you are into DIY you can try your OLED monitor with Luciferin bias lighthttps://youtu.be/Ih9KorYRSpk
