Gaming Network Adaptors
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Guest Network Pro

Can anyone explain why devices assigned only to a guest network somehow access my main network ? Even while on a subdomain this happens.When I create a Guest Network on ASUS router it gets created as a VLAN, if that helps?if not is there a way to cre...

n1olan by Level 7
  • 125 Views
  • 1 replies
  • 0 kudos

Asus tuf F15(2020) wifi not showing

I have tuf F15 2020 version I was working well but from last week I can't see my wifi on my laptop did everything but it didn't work I think I need to change my wifi driver #tuff15

Unable to install LAN Drivers

Hi Everyone,Hope someone can help me, I have built many AMD PC’s and this is the first time I had this kind of issue on an Intel build, So I recently bought an Asus ROG Strix Z590-A gaming WiFi II motherboard, with a Intel i9-11900K Chip, in terms of...

ASUS PCE-BE92BT Wifi7 BE9400

Hello, I recently bought this PCIe card to upgarde my system to WiFi 7 so i can use most of my 1.6Gbps FTTP network speed (using an ASUS ZenWiFi BT8) but unfortunately it does not work at all. After some research online (I know I should have done thi...

MultiDoc by Level 10
  • 1189 Views
  • 0 replies
  • 0 kudos

XG-C100C OUT OF STOCK EVERYWHERE?

Does anyone know where one can buy one in Canada? They are out of stock EVERYWHERE.Is it because the V3 came out but is not yet available so all the V2 are out of stock?All I see is the XG-C100F which is not what I need. (Looking for Rj45)

WiFi 7 speeds

Hi Everyone so I recently purchased a Intel be200 card to use with my Beasty Asus GT-BE98 router. Problem is when I connect to MLO or the 6GHZ band the speeds I get are max 1.4gig down/up. whats everyone else’s speeds they have seen with this card. I...

WAVLINK INTEL BE200

 hello allI purchased this wifi 7 adaptor for my AMD setup. It does work but problem is 2.4,5 & 6GHZ are all limited to 20MHZ in the settings . Would there be anything that I have done wrong or am I best just sending back.I can connect to the 2.4ghz ...

IMG_4352.jpeg