Gaming Network Products
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Proper setup for wireless AIMESH

I have a GT-AX11000 PRO and a single  ZENWIFI XT8 (in WIRELESS AImesh node).  Not quite sure  if I set it up properly on the web interface, particularly the band settings.  Kindly take a look at the attached screenshot and let me know if this is corr...

ASUS.png

Resolved! When will have GT-AX6000 firmware update?

It is long time without firmware update of GT-AX6000. What is the issue?The product is only released 2years+ (maybe 3 years). I purchased it to replace my RT-AC88U. If ASUS's product life cycle is that too short, i can't trust and support anymore. Bu...

YK_Kwok by Level 8
  • 739 Views
  • 19 replies
  • 15 kudos

GT-AXE16000 5G-2 UNII-4 Question

I am wondering if Asus would enable UNII-4 to AXE16000 Router in future? ( U.S.  region) Here is my current setup AXE16000 + 2 XT8s ( 5G-2, wireless backhaul). Without the UNII-4 Supoort, the maximum PHY speed I could get is around 1100 Mbps ( 80Mhz ...

2024-04-28_20-37-14.jpg

BE98 Pro Segmenting a Subnet Using VLAN

I want to use VLAN on  a BE98 Pro  router to segment a subnet on a specific port.The idea is isolate a web server from the rest of the network.Can I use a separate subnet address (e.g., 10.1.2.0) with hosts on this subnet?How do they contact the rout...

Nothing connects to AI Mesh routers

HiI have an RT-AX88U plus 2 AX6000's as mesh nodes, they are both connected with 2.5G ethernet. I'm baffled though since basically nothing connects to the other nodes. The pic below, this is about 1.5m apart at most. Anyone have any advice, settings ...

Greeny_SA_0-1712471403901.png