Hi everyone, I'd like to have a 3D file of the ROG hyperion gr701 top cover. My goal is to be able to fit 25-30mm thick fan on top of my radiator. With the stock cover, you can't put any fans there and I'd like to do a push-pull rad setup. I would pr...
Hi all, I am looking for the model for a M.2 Fan mount designed with the Strix x370 Gaming f in mind. The 3d mount points appear to be located in different places from the z170.Thanks in advance to any help.John
Hi folks! I try find good pictures or caddraw of B550M Plus, without sucess All photos or drawings are distorted, which does not allow you to create parts or body armor properly.Does anyone have the CAD file of the B550M Plus TUF?I'm making a GUNDAM...
hallo hat jemand die druck Datei für die io Cover für das rog strix z270h weil würde mir das gerne selbst drucken
https://press.asus.com/content/201608311048155220.pngThe picture wont post so there's the link to it. Has anyone seen the download for these anywhere or maybe even have the files. I've managed to find a 3d printing files from ROG but not the Claymore...
Hi,I plan on printing the following:- IO cover for z170 pro gaming aura- 24 Pin cablecomb- A fan grill (my custom design)It would be good if I could print these parts using PLA plastic. High temperature resistant PLA is also alright but I haven't got...
(I couldn't decide if this was hardware or 3d printing. So I decided to post this here first, I'll give it a few days and then repost in hardware.)Hi Asus and ROG, the Kickstarter opened up for Coolermasters Heatsink case for the Raspberry Pi 4 and I...
ASUS welcomes a new era of PC customization by being the first motherboard brand to support 3D-printable parts, an initiative that allows hobbyists, enthusiasts and modders to add unique modifications to their ROG Strix X99 Gaming and ROG Rampage V E...
Is there anything planned for the Crosshair VI Extreme Board? It would look really nice with a few 3D printed add-ons (e.g. a shroud for the bottom connectors.
Hi guys,I'm looking to wall mount my ASUS RT-AC86 router. I found a bracket for the AC68 (https://www.thingiverse.com/thing:1659893), which is ALMOST perfect, except the holes for the antenna are a little too small. They need to be about 13.2mm in di...
