ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood optionsto disable cores ccd go here and choose ccd xx bit map down core.each ones stand for an enabled corebest to disable from the back, i...
Hi everyone,- AMD|MediaTek WiFi Drivers (Drivers Only) : Drivers : 3.3.0.789 WHQL [28/03/2023]Download : Link Install/Update Process :- Press Windows key + X > Device Manager > Right-click on your AMD|MediaTek WiFi device > Update driver > Browse my ...
I am getting 65 celsius on idle at 28 celsius room temp70-80 celsius when playing game. It looks like this also affects Asus Intel boardhttps://rog.asus.com/forum/showthread.php?131357-Overheating-chipsethttps://rog.asus.com/forum/showthread.php?1272...
Occasionally my Intel 905P is not detected on cold boots. Rebooting will detect it properly. On my other systems this is not an issue so I believe it may be a bios related issue where the drive isn't initialized before handing off to the OS or some...
A new network driver (v.2.1.3.3) is now available for the motherboards below, it is to mitigate the connection drop issue.ROG CROSSHAIR X670E EXTREMEROG CROSSHAIR X670E HEROROG CROSSHAIR X670E GENE ROG STRIX X670E-E GAMING WIFIROG STRIX X670E-F GAMIN...
Hey guys I have a new build with a 7600X, Gskill Trident 5 32GB DDR5 and the Asus X670E Extreme board and I cant get it to boot, just shows code 00 on the LED and the Oled shows 00 MemoryI have tried everything including single RAM stick on multiple ...
Hi Do x670e strix motherboards have suport for modern standby (0)? I'm trying to turn on the secury features in windows 11 and so far i cant because its required modern standy i ran the cmd command powercfg /a and it shows its not suported. I have al...
Hi everyone,I built a new PC and I'm experiencing terrible coil whine when booting into Windows 11. It almost never stops, even when idling on the desktop. It gets noisier when moving my mouse or scrolling a web page. If I have to describe the noise,...
I recently got a b650e-e system set up, and noticed that some of my USB devices weren't working. Normal troubleshooting, I just unplug and replug somewhere else - worked - good to go, moving on. But lately, as I've added more devices occasionally or ...
Hey all, interesting one here. The manual says to put the memory in A2 & B2, but my config only works in B1 & B2. A single stick will work in B2 but a single stick will not work in A2. I have upgraded the bios and went int there to ensure it had t...
