I noticed today the new microcode is out, but the title says its for the EVA motherboard and yet the bios appears on the original ROG MAXIMUS Z690 HERO page, I am reluctant to update in fear that there is a difference?
I await your wisdom
CheersRya...
Originally on my Maximus Hero 690 with a 12900k and 4 sticks of DDR5 Corsair Vengeance 4800 mhz when it first released until TODAY I have never been able to get XMP to work without boot errors / BSOD etc.... I did manage to get it working at 4200 I ...
My new PG48UQ is dead after a firmware update, there is no standby light, there is nothing, does anyone know if there is a hard reset button on the monitor itself, for example I hold it down as I turn on the power?CheersRyan
Hi there, got a strange problem with the on screen display, the image looks curved, I have cleaned Nvidia drivers with DDU, using DP connection, also tried the HDMI still same, any ideas? CheersRyan
For some with 4 sticks of DDR5 (64GB) there have been problems with the XMP profile, I have the Corsair Vengeance 4800MHZ and depending on which BIOS I have been running the ram between 4266 and 4600, the latest BIOS 1720 for me is the worse yet.Eno...
UPDATE: Here is the reply from Asus: Kindly be advised that the BIOS version 3802 is currently in BETA, meaning that crashes or potential issues may occur. Aside from this aspect, the 3802 version is currently suggested for the EVA owners, but the on...
I have just updated to the latest firmware, will see if it stops the auto pixel refresh every 4 hours, I must admit I was a little worried updating as my first monitor was bricked by a firmware update when this monitor first came out, then when I rec...
Hi, just want to chime in on problem 1, yes having the same issue, after so many hours the screen goes black, nothing works not even the remote other than pulling the plug out and back in again. Not sure if it is a pixel clean because that usualy has...
