My new PG48UQ is dead after a firmware update, there is no standby light, there is nothing, does anyone know if there is a hard reset button on the monitor itself, for example I hold it down as I turn on the power?CheersRyan
Hi there, got a strange problem with the on screen display, the image looks curved, I have cleaned Nvidia drivers with DDU, using DP connection, also tried the HDMI still same, any ideas? CheersRyan
For some with 4 sticks of DDR5 (64GB) there have been problems with the XMP profile, I have the Corsair Vengeance 4800MHZ and depending on which BIOS I have been running the ram between 4266 and 4600, the latest BIOS 1720 for me is the worse yet.Eno...
I always disable it, but it must have enabled itself again during a Realtek update, over the past week had problems with some VST plugins GUI graphics, today my Affinity photo and Designer which then made me click to check on that cursed service whic...
UPDATED THIS POST TO PREVENT CONFUSION:No TPM chip in Maximus Xiii which is a requirement for Windows 11 is now solved, in short most modern Intel CPU's have it's own TPM module under the name of PTT which can be enabled in the Bios, you do not need ...
Hi, just want to chime in on problem 1, yes having the same issue, after so many hours the screen goes black, nothing works not even the remote other than pulling the plug out and back in again. Not sure if it is a pixel clean because that usualy has...
Romzess wrote:After updating the firmware, the speakers make noise all the time only if DisplayPort connection. If I turn off the speakers the noise is gone.At least your firmware update worked, it bricked mine, got a new one coming...
DrFugue13 wrote:what did you use to verify it was working? The "G-SYNC Compatible Indicator" or something else?Thanks!In the Nvidia Control Panel menu bar / Show indicator for G-SYNC while in game
It was working on my 48 inch version, BUT... think twice before updating to the new firmware, my monitor is dead, it was updating, then it restarts as mentioned in the instructions but never turned on again, so be aware. Mine is going back in the nex...
