MVIHero Voltage issues.. Gigabyte better? Help...

[megastarkey]

roblem with Maximus boards? Voltage issues and more.. help please.
Everything below was tried with the latest BIOS for the Maximus VI Hero.

I purchased a Maximus VI Hero a while back with 4770k... finished my build and booted it up. Tried to do what JJ stated 4.6 @1.2 boot it up and pray. No go for me. Ended up 4.6 @1.375 volts to boot. 4.6 @ 1.42 volts to run realbench encode.

I had to memory slots go bad so i returned the mobo and got a replacement (I love Microcenter).

This time to boot into 4.6 it took 1.4 volts and 1.44 to run Realbench. This was outrageous. So i bought another 4770k. Tried same thing.

This time 4.6 @1.3 volts... much better! 4.6 @ 1.36v to run Realbench.

However I would get several BSOD etc. After weeks of frustration and testing I decided to try another motherboard from Gigabyte UD4H.

Install, using the JJ way BAM I booted at 4.6 @1.20v. Stable is 1.212. Ran realbench at 4.6 @1.26.

I have heard from others discovering this very same issue and solving it by changing to a non asus mobo.

I really like ASUS but I am surprised by this and concerned. Anyone else have any thoughts?

[Chino]

Each motherboard is unique and overclocks differently. If the Gigabyte does what you need and in a better way, then go for it. 😉

[HiVizMan]

Yeah that is good advice. Each bios will have different settings and work your CPU in different ways. The ASUS bios might require a touch more voltage in certain situations. Just as long as you are happy dude.