I noticed this as well with my AX11000. Using it as router mode, (Randomly)the router would just disconnect my network from the ONT(the lights on the router is showing normal operation, no alert or anything). A reboot will usually get my network conn...

have u tried to set CPU C-states to enable from auto? I had this issue when I was overclocking to 5Ghz setting adaptive voltage. Some pros updated that sometimes you may need to set C-State from auto to enable for the power state to work. You can try...

Alaxang wrote:Hi All, I have the same issue with rjbrarker and I cannot find this Package C state limit under my Power Management Control.CPU - i9 9900kMB- Z390 GeneXMP 1sync all coreAdaptive Vcore -1.29 offset- autollc-lvl 6Current capability -140%O...

I was thinking whole night and this morning I went to play around with window 10 power option. Default was on balance so I changed to power saving and there the frequency and vcore was dropping on idle. However when I changed back to balance it was b...

Hi All, I have the same issue with rjbrarker and I cannot find this Package C state limit under my Power Management Control.CPU - i9 9900kMB- Z390 GeneXMP 1sync all coreAdaptive Vcore -1.29 offset- autollc-lvl 6Current capability -140%OC @ 5GHzBio Ve...