Zenith Extreme & X399-E
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Ram issue

Recently decided to reseat an repaste my system, along with reseating ram just cause recent game issues I've had. Reseated ram first, no fix, went for the repaste/seat and had error Ad and 0d (varied upon reseating cpu numerous times) Started removi...

X399 Strix New Bios

Was nice to see Asus released a new bios for the strix, but sucks the zenith extreme seems for gotten about, and how about throw us a bone asus, and unlock resizeable bar please..

Zenith II Extreme Alpha HDD Code 02, CMOS Error

Hey everyone, I’m having an issue with my pc boot right now. The last few days whenever I start my PC for the first time in the morning after shut down the previous evening it throws the following error: “Reboot and select Proper Boot device”.If I ma...

Zenith II Extreme Alpha M2_1 to AHCI ?

Hi,I have installed as a main drive (OS) on M2_1 a 1TB ADATA XPG Gammix S70.It is running fine.I just saw that there is a firmware update for this drive.Attached are the instructions on how to update it.They say that I must set the drive to AHCI on t...

Swiso by Level 9
  • 2758 Views
  • 14 replies
  • 0 kudos

Tpm = error 33

Like many I have started to dabble with tpm, so when enabled I get q code 33, when disabled AA. It hasn't caused any issues an passes memory checks, jus bothers my OCD. Any advice or help on getting rid of 33 or why I get that code?1950xX399 strix8x ...

Zenith II Extreme Alpha - SATA Ports

I just finished a build with an Zenith II Extreme Alpha. I have two M.2 SSDs mounted in the two slots on the motherboard. I also have a 12TB hard drive connected to the motherboard via a SATA cable. (No RAID.)My question is: Which of the 8 SATA po...