Crystal Bench with 601 BIOSCrystal Bench from my Laptop with NVMe driveI have reset the bios and cleared all overclock settings.This is causing the system to run slower than my laptop. Loading up photoshop feels like I have a sata platter drive.Rand...
I’m having a minor but annoying problem on one of my PCs. Zenith II Extreme Alpha motherboard, AMD Threadripper 3970x, latest update of Windows 10 Pro, latest BIOS.When I restart the PC either manually or after a software update it does not fully re...
Happened to me twice already over the past year or so. I have 2 NVMe's in RAID 1 configuration. When the problem happens, Windows suddenly fail to boot, and I get blue recovery screen with options to Repair OS (but doesn't fix anything). Each time...
Just a quick post to ask if there are any limitations / performance issues to using the Dimm.2 module on a Zenith II Extreme Alpha motherboard.I know that using certain M.2 slots means certain things are disabled, but I cannot recall if this is so fo...
Hey!Earlier this year I bought a Zenith Extreme Alpha with a Threadripper 2950x. The previous owner had problems with it booting, but I bought it anyway because I wanted to see if I could get it to boot. I haven't been able to boot it because it gets...
Just a brief post to report success with running an X399-E board with 2950X CPU and 256GB (8x 32GB) of Corsair Venegance 3200MHz DDR4 RAM installed. My use-case is VMware ESXi so unlike 99% of the posters in this forum who obsess over what vendor/...
Can anyone recommend a good fan control software alternative to AI Suite 3 (which I want to uninstall). I tried SpeedFan 4.52 but it can't find any fans on this system (Configure/Advanced/Chip-dropdown shows only storage devices and gfx card, no moth...
Hey guys,As mentioned in the title, your thoughts? What do you use your PC mainly for with the Asuses AMD Threadripper platforms? What is your experience so far since they were introduced to the market? Do you think that this processor is one-of-a-ki...
soory... for bad english since few days my Zenith II Extreme Alpha dont show me CPU Temp on display correctly.during pc boot display show me the CPU Temp correctly... but after windows loading the display show me only CPU Temp: N/AGPU Temp is showing...
I noticed under the overclocking setting there's an option to treat the numa nodes as separate nodes each. However, I receive a warning about accessing the oc settings. Is it safe to enable treating the four chiplets on the 3990x as separate numa nod...
