Hello,
i have Z390-E Gaming Mainboard and my 2 RAM works only on Dimm_A1 nad Dimm_A2.
I know, recommended is B2 and A2 for Dual Channel...
Now i buyed the same RAM and installed this but it doenst works...
If i start Boot, the PC reboot 4x and then runs without Post or Bios (Nothing on Screen)
I checked the all RAM on A1 and A2, all fine.
Support says Upgrade Firmware and Reset Mainboard, i installed the newest Firmware and reset but same Problem...
XMP Profile and Voltage from Auto to 1.35V same Problem
Anybody a Idea?
Mainboard = ASUS ROG Strix Z390-E Gaming
RAM = G.Skill F4-3200C16D-16GTZR