12-01-2021 06:42 PM - last edited on 03-05-2024 06:49 PM by ROGBot
12-02-2021 08:55 PM
Toodyt wrote:
My PC is the Strix Z370 WiFi / I7-8700 / 16Gig DDR4
FW= 3004
Have check Intel which shows the Chipset up to date.
I have recently updated the 850 to Win11 and thing were good I had a Device error showing for AAP Server.
Completed a backup on my USB Backup
However I saw a deal on the NVMe and bought it and a New win 11 to do a fresh install.
I have just installed a 2nd Boot drive to use for work.
The original Panasonic 850 Pro SSD and added a 970 Pro NVMe 1TB M-2 SSD Installed in the M-2 slot.
The Samsung NVMe Driver was installed.
Since I Installed the NVMe I cannot used my Backup Drive as it does not power up the drive. Tested on my laptop and it works good.
Tried in all USB Ports.
The original 850 SSD:
1. DVD/CD-ROM shows No Media in the Disk Management. Had to use a USB CD-ROM to Install win11.
2. The Card reader which used to work also shows No Media
3. Shows Other devices APP Server Error
4. Normal USB drives work however my Backup drive does not power up.
The 970 PRO drive:
1. DVD/CD-ROM shows No Media in the Disk Management
2. The Card reader which used to work also shows No Media
3. Shows Other devices PCI Controller and SM Controller Error
4. Normal USB drives work however, my Backup drive does not power up.
I have Uninstalled and Installed the Drivers a few times with all USB devices disconnected.
Turned off power save in the power management.
12-03-2021 12:33 AM
12-03-2021 06:07 AM
12-04-2021 06:25 PM
12-07-2021 10:40 AM
Toodyt wrote:
MoKiChu.
This was very good I have all of the Drivers on my NVMe now as you have given them here.
Everything appears to be working well.
However I still have the AAP Server/PCI Memory/ SM Bus Controller showing in Other devices and showing error Code 28 on the last 2.
The Code indicates the Bluetooth/ethernet which all clear when the Bluetooth Drivers a re deleted.
As soon as dthe Driver is installed they return.
I was able to compare this to my 850 ssd which I still have bootable.
This is the original drive and does not show the PCI or SM bus errors.
The Driver Store shows the original Bluetooth Driver was Qualicomm Atheros 10.0.1.7
The realtek driver is 1.9.1038.3001 is in service.
Is it possible the Qualicomm driver had some config which satified the PCI/SM Controlllers.
I have looked but do not see a trusted source.
Reluctant to install the same drivers in the 850 and end up with the same errors.
Thank You!
12-06-2021 07:41 PM
Toodyt wrote:
My PC is the Strix Z370 WiFi / I7-8700 / 16Gig DDR4
FW= 3004