XI Hero RGB lighting very dim.
Just finished building a new machine with an XI Hero. The Aura lighting particularly on the I/O cover is so dim I can be barely see it. Pretty disappointed about this. Is my lighting faulty? Can it be easily remedied?
Just finished building a new machine with an XI Hero. The Aura lighting particularly on the I/O cover is so dim I can be barely see it. Pretty disappointed about this. Is my lighting faulty? Can it be easily remedied?
Hi all, having 2 serious issues with my Z370E motherboard. I am running an 8700K with the board.First manual voltage over-ride appears to be completely non-functioning as whatever voltage I set, it always applies stock voltage. I have verified this ...
NVME 2TB ~ Seen as SCSI in device manager ? / Windows Backup Issue Toohello,i recently installed new nvme drives and having a couple issuesMotherboard = Z390 Pro Gaming w/ Bios 3004Samsung 970 evo plus 1TB = C: drive - installed on lower m2.2 slot an...
I'm using Asus ROG STRIX Z390-I GAMING motherboard and Geforce GTX 1080 Ti GPU. When PEG-PCIE ASPM is enabled, PEG-PCIE speed is set on Auto (Gen.3) or Gen.3, any 3D application causes immediately GPU driver crash, so application crashes to desktop. ...
If I install 2 m.2 nvme drives will it disable any sata ports? I had an older maximus board and it disabled sata ports 5 and 6. Read the manual but it states will only disable port 2 if im using a sata m.2 drive. Thanks for any help!
i am on bios 1105 because my ram is not on the qvl and has problems posting when i try to update the bios my question is can i enable tpm 2.0 or do i need a module for this board?
Hi allI wanted to activate the TPM on my ROG STRIX Z390-E GAMING and somehow I can't access the UEFI anymore. At startup I don't see the "Republic of Gamers" logo anymore either."Fast Boot" is turned off and I can't get into UEFI mode via Windows UEF...
I have just updated my bios from 1802 to 1903 and I cannot use XMP profiles as machine then fails to post and goes into safe mode. If I use the base BIOS it works and if I leave on auto and change the clock speed to that of my memory it works. Not ...
Hello!Getting into TVB to milk a bit more out of my 5.1ghz 10900k OC. I thought that using TVB would give you a little extra at light loads beyond your all-core ratio without adding voltage. I have a 5.1 all core 10900k that is stable at 1.32v under...
you can tell the bios for the model from the link names:https://www.dropbox.com/s/kl65p17gjpbiyx4/ROG-STRIX-Z490-I-GAMING-ASUS-0901.rar?dl=0https://www.dropbox.com/s/xng2l0aupm72osv/ROG-STRIX-Z490-H-GAMING-ASUS-0901.rar?dl=0https://www.dropbox.com/s/...