02-17-2017 07:58 AM
02-17-2017 08:09 AM
02-17-2017 08:34 AM
You can connect your AIO's pump to the AIO_PUMP header and your fans to the CPU_FAN header.
02-17-2017 08:35 AM
02-17-2017 07:16 PM
nikos xatz wrote:
* p.s: Chino was quicker then me 🙂
02-17-2017 08:53 PM
02-17-2017 09:16 PM
Connect it to your CPU Fan Header, and connect a regular fan in the other and try.
Its weird but when I use my Corsair H110 I get the same problem unless I connect another 120mm or 140mm fan to the other header.
02-17-2017 11:57 PM
02-18-2017 05:33 AM
I did those steps...
- Connect the AIO pump to *motherboard [AIO_PUMP] (But looks like isn't detected)
*- Connect those two fans to CPU_FAN/OPT
- Pump installation is good
- Thermal paste is enough...
Just turn on PC and after 4 mins it was over 75• . I did check the fans, the radiator was cold, but the procesdor getting hot...
Could be the thermal paste (used an 2 years old from Rosewill (RCX-TC001) that I used with first build? or maybe I need to buy a new cooler ��
I just attached a picture about the problem...
*Thanks for help in advance
02-18-2017 09:47 AM
Did you verify your pump physically to see if it's indeed working?