I have tried the default XMP for this ram, and i have the latest Bios for this motherboard. But i cannot get my PC to boot with XMP enabled. Ram works fine at 2133Hz. I tested both sticks one at a time in slot A2 with XMP enabled. They both work i...
As per the following statement, the correct BIOS for the ROG STRIXZ270-I to be compliant is 1001; however, the product page hasn't been updated since 10/20/17 and shows v0814. Where's v1001?https://www.asus.com/News/V5urzYAT6myCC1o2
Hi! Is this Spectre update on the way for Maximus IX Hero? https://newsroom.intel.com/news/latest-intel-security-news-updated-firmware-available/Regards Robin
Heyi have done my best to solve it but i have done everything new cables connected like hdmi and displayport other video card time and again with the same problemI hope you can understand me I have difficulty typing but I will do my bestreinstalling ...
hello all im having issues with my maximus ix formula motherboard. its running on windows 10 with latest updates. For a while since i had this system running iv been using sterio speakers and quite recently i got a new 5.1 speeker system to replace ...
I just finished a new build, and I'm using an Intel Optane 32GB memory module, a 1TB Samsung 960 EVO NVMe M.2 SSD, a SanDisk Extreme 2TB SATA SSD, and a Seagate Barracuda 7TB HDD. The Optane is setup caching the SanDisk 2TB SATA SSD, which is used as...
Does sonic Radar work with SPDIF and a separate Headphone Amp?
Ever since my current build finished the lengthy "Fall Creators Update" about a week ago, my system refuses to shutdown correctly.When either using Start>Shutdown, or pressing the power button to trigger a proper shutdown of Windows 10...System gets ...
greetings, since I like my MB asus z270e to 1203, every time I open a game, my pc freezes, and then it resets, this having happened no more than 5 mins the game started, I insist, I had no problem with my pc before, everything was to update the mainb...
I built my PC about 3-4 months ago, and it ran fine for a while. Last week, it was running really slow, so I shut down normally via Windows. When I tried to restart, it went to the Bios and said that there was a POST error. I exited the Bios, and som...
