Hey, I'm having an issue with my 7700k being stuck at max turbo x48 multiplier and max voltage upon cold boot. It never downclocks even if idle for a few hours.If I restart, the CPU is no longer stuck at full turbo and will downclock when idle and bo...
In any other mode but Windows, my cpu temp and system fans ramp up like crazy. I can do nothing but enter BIOS and my CPU temp rises very quickly. My radiator fans also ramp up rather quickly. This is abnormal behavior and is not reflective of the...
I started out making small incremental changes and testing but became frustrated with the lack of any sort of progress or meaningful -- at least to me -- results and then I broke the cardinal rule of troubleshooting -- change one thing at a time. I ...
Note: I'm having this issue with a PRIME Z270-A. I understand that it's not a Strix mobo, though it is (obviously) a Z270 board. Therefore if I've popped this in the wrong section of the forum, I do apologise.I've recently bought a Z270-A board and a...
I have a Asus Z270 IX Apex and noticed on the motherboard Q Code 25.It stays on 25 all the time and never changes..My PC boots fine runs great in windows with my OC of memory and cpu with no crashes.Just curious what Q Code 25 means.My I7-7700k idles...
Ok I built this computer in January and it has been running great. Yesterday I took it apart for regular cleaning and when I turned it back on I get no post and q-code 0A. That code is not in the book so I thought maybe DA Boot option failed? So I re...
Hi,Spent the better half if not the whole evening trying to solve a problem I had with a mystery usb device that was misbehaving. For starters in Device manager I would get a listing for an Unknown USB Device - In compatibility mode - Failed enumerat...
I picked up a used mobo that I know was working when the guy removed it. I have it populated and powered up on my work table. It will not POST. It stays powered up with the CPU fan continuing to run but the status display reads "55" and the RAM le...
I have a NVME SSD , a sata SSD and 4 harddrives. I want to enable 4x NVME without disabling the sata ports 5 and 6. I have installed the NVME inside the port under the cover but enabling 4x mode disables the 5. and 6. sata ports leaving one of my har...
Hello all, I picked up an Intel 1TB 660p M.2 drive last week and got it up and running. I decided to bench it with Crystaldisk and noticed it was getting around 1800 read and write when it should be getting around 3200. I did a lot of reading and t...
