X99
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

R5E10 SupremeFX Hi-Fi Front panel doesnt work correctly

front panel was not working with my sound player when i switched to it while player was open it worked but if i close and open again it did not work at all (tested with kmplayer and media player classic) so i said lets update it and installed latest ...

Asus X99-E-10G WS

Hi all,I'm struggling with a GPU workstation for a customer.Setup:Supermicro Tower / 4U chassis Asus X99-E-10G WS (latest FW 0603)6900KKingston hyperx HX430C15PB3K4/642x Samsung PM863a 240GB 2.5" SATA-3 Enterprise Class SSD 4X HGST Ultrastar 7K6000 H...

HELP! Is 28 GB RAM unstable for Rampage V Extreme boards?

One of my RAM sticks recently died and I am now using only 7 x 4GB. Sometimes one stick isn't read and it will show I have 24 GB of RAM. Now having little to no knowledge of dual channels will this affect my performance? Should I cut down and run 16G...

Rampage V Extreme Edition 10 help?

HI guys, small problem. My specs are as follows:RVE10 @ 1003 bios6850k16gb LPX vengeanceNHD15SSLI 1080 ti960 PRONOTE: All settings in bios are at F5 settings (optimised defaults). No other settings have been changed. No overclocks or XMP enabled.So, ...

Rampage V Edition 10 NIC's AT vs V

I have owned this from release AND JUST now noticed this. I knew it had built in wifi and GBe NIC. BUT NOT 2 ENTIRELY DIFFERENT Network adapters. I figured they were more of a fail over design. Like in you can quickly swap nics no drivers needed if o...

67265
Qoto159 by Level 7
  • 8531 Views
  • 17 replies
  • 0 kudos

HPET and Windows 10 on RVE

Hullo all. Seeing as we don't seem to have an option to enable/disable HPET (High Precision Event Timer) on the RVE, I'm wondering if anyone's taken to playing with the settings in Windows 10 and if they've seen any performance improvement by disabl...

Qwinn by Level 11
  • 19899 Views
  • 5 replies
  • 0 kudos

Rampage 5 Edition 10 BOSD "Machine Check Exception" Error

Greetings,since i built my new rig in july 2017, im getting BSOD "Machine Check Exception" on every boot and reboot in windows 10.I recently disabled fast boot in windows and bios, killed all saved keys, disabled CSM but the errors continue to occur....

ga-tom by Level 7
  • 7430 Views
  • 15 replies
  • 0 kudos

Offset voltage used with adaptive voltage

Are there any use-case scenarios for using both offset and adaptive voltages concurrently? I'm wondering when the delta between the baseline voltage and adaptive turbo voltage becomes a noticeable factor in your settings. I imagine that the climb fro...

maddick by Level 7
  • 1119 Views
  • 0 replies
  • 0 kudos

Random bf and bd error code

Getting random bf and / or bd error codes. This is an intermittent problem either at stock or even overclock. Running G.Skill RGB 3200 mhz RAM that is QVL. Anyone with an idea as to what is causing the issue and if so..how to fix it ??

Rampage V Extreme RAM Issue

Hi @all, currently I'm experiencing some weird issues with my mainboard. First of all here is my config:Rampage V Extreme Bios 3701i7-5930K32GB G.Skill Ripjaws 4 DDR4-2133ASUS GTX970 STRIXplus several SSDs The thing is, I did buy another kit of Mem...

Top Kudoed Authors