Hello to the great forum!Has anyone tried to get boot with ''ASUS Hyper M.2 x 4 MINI Card PCI-Express Adapter'' ( with M2 ssd install of course) with RVE10 board ?Can boot from all pci slots ?I ask because I want to boot with 2 M2 SSDs on my PC.Than...
Hi guys,I've just built a new computer using an ASUS ROG Strix X99 Gaming motherboard (BIOS 0601), and I have been having a strange problem:When I use safe defaults in BIOS, my Samsung 960 PRO NVMe M.2 1TB SSD is visible under boot devices, and can b...
I've posted this before, with no result, but I think I can provide more information, now.For whatever reason, it appears that as the weather approaches fall and winter, my computer will not boot. I end up having to reset the CMOS battery (using the ...
Just noticed I forgot to turn the toggle off after melting some phase change TIM to the cpu. Didn't really notice the computer behaving unusually slow or anything like that. If anything it has been feeling fairly fast. Temps are still the same after ...
hellolast week i decided to install AI Suite 3 version 10101 and upgrade it to DIP 1.05.14 to use full benefit of AI Suite other programs.Something happened, when i tried to start pc the splash screen of bios give me this message:- please enter setu...
Hey guys!!!I have a question regarding ram quad channel ROG RAMPAGE V EDITION 10.I have 5 sticks of DDR4 CMK16GX4M2B3000C15 RAM with 3000MHz + XMP profile ON .How is 5 sticks give me quad channel ... ? P.S. Look at attached files for more info about ...
Hi guys I just purchase a monoblock from EK for my rog r5e10 and due to that i had to remove the mobo and install the monoblock. Once finished with the installation and re-sitting every component back in place, SSD/RAM/GPUs and upon booting am readin...
Mobo: Rampage V Edition 10I have 3 fans hooked up to the HAMP fan header with a PWM splitter however the source temperature that the fan curve follows is off. I am trying to get it to follow the GPU instead of the CPU and so obviously I set this to P...
I'm trying to adjust the vccio voltages to get ram stable. I've read recommendations that vccio-d should be 50 mv higher than vccio-a, but I just see cpu and pch vccio in the bios. Which voltage maps to which?
Hi there, I recently contacted your tech support team, in regards to getting a replacement I/O frame for the now discontinued Rampage V Edition 10, cause my board apparently didn't come with one. Only they're telling me they CAN NOT apply me one beca...
