X99
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

R5E10 Bios led always on when PC is off

Hi, I have latest 1902 Bios and latest Aura versionwhen PC is off I managed to get all rgb lights turned off and all leds off except those one bios led, the led which shows which bios is active, bios1 or bios2Will it be possible to turn it off too?*

75387
Belik by Level 7
  • 1634 Views
  • 3 replies
  • 0 kudos

R5E USB ports not working

Hi All,The USB ports that are under my ethernet port are not working, I find it strange that they are the only ones that are not. I plug a device in and I get nothing in Windows, no sound and no device.Any ideas what the problem could be? I've checke...

replacement cables for OC panel

So I lost my cable for the ROG OC panel that comes with the board... where can I get a replacement one? It's kinda useless without it!

Problems updating my BIOS Rampage V

Hello everyone.Tonight i tried to update my bios to the 3801 version, but with no luck.After Flash my system boots, stops at code 33 then goes into the same loop over and over.I tried regular flash through EZ flash and USB flash, even tried the new m...

detc0rd by Level 7
  • 1825 Views
  • 3 replies
  • 0 kudos

What are thouse pins for ?

Hey all i read the manual but didn't find any refference to the following pins , anyone knows what are thouse pins on the photo inside the yellow cyrce are for ?m

75254
teoskyr by Level 7
  • 1614 Views
  • 5 replies
  • 0 kudos

BIOS Issues

Hi All,Having problems, any help is appreciated. Any thoughts would help.Original Problem...Network Connection Fails on Boot, Clean windows 10 install tried first (through Control Panel)1. Uninstall using Device Manager2. Scan for hardware (Reinstal...

CPU Fans at bootup - what is normal behavior

We had to replace my Rampage V Extreme x99 motherboard after the original one died. Upon boot-up, both CPU fans spin momentarily, but then stop. Is this the normal behavior or should they continue spinning? If it isn't the normal behavior, is there ...

Rampage V Extreme can't enroll MOK in UEFI using Linux (Ubuntu Bionic)

Hi!I've recently opted for enabling secure boot on all my computers, and success came easy with all of them save my primary (the R5E). In that box, I kept getting blocked by a failure to enroll an MOK in UEFI from Linux (Ubuntu Bionic) using mokutil...

Rampage 5 bios updateloop

Tryed to update bios, and somehow i did get my bios 1 corrupted. Now as im trying to kick off with bios2 it is only on bios updating txt on screen and dosent do anything. Even if i start overagain it even wont let me go in bios settings and it just g...

paessi by Level 7
  • 2559 Views
  • 10 replies
  • 0 kudos

Rampage V Extreme Q-Code 00 first then boots after recovering bios settings

HiI am having a problem with my Rampage V motherboard. When I disconnect the power cable or there is a power outage and i try to start the computer the motherboard says 00 in the Q-Code panel. Then I have to hold the power button to turn of the compu...

Daggi by Level 7
  • 1534 Views
  • 2 replies
  • 0 kudos