07-13-2020 05:15 AM
07-13-2020 05:37 AM
07-13-2020 06:31 AM
The error code indicates GPU or GPU driver. However, your under-clock maybe the root cause and would stop doing this till you have sorted stable system.
You need to check your windows 10 install using this.
run as admin [powershell] (type into search bar, when you see it pop up, right click on it and run as admin)
wait till complete
now run (still in powershell)
Dism /Online /Cleanup-Image /RestoreHealth
wait till complete
if either found and fix integrity errors or corruptions, reboot and then repeat both steps again. If you get caught in loop greater than twice than you have serious windows 10 installation issue. The purpose of the above is to correct any critical errors in windows 10 install.
I also recommend you completely uninstall your graphics drivers, reboot and then custom install your Nvidia driver and select clean install.
Then re-test without any underclock and see if you have stability.
07-13-2020 06:41 AM
thank you, im gonna do those steps now
07-13-2020 08:47 PM
No problem, good luck and be on tomorrow, just reached midnight here and off to bed.
07-13-2020 07:53 PM
07-13-2020 08:53 PM
Your CPU under volt is way more aggressive compared to what other 9750H owners are using. Back it off significantly. What sort of stability testing have you done? I would reduce the CPU under volt to -175 mV and start a wide variety of tests there. Full load tests are good but you also have to do some part load tests like 1 or 2 threads of the TS Bench or 1 or 2 threads of Prime95 Small FFTs. This load will get moved around from core to core as it runs which is a lot more realistic compared to fully loading the CPU in a steady state.
07-13-2020 10:29 PM
07-14-2020 01:48 AM
Nvidia latest drivers from NVIDIA are best unless you have specific issue with them, then revert to what Asus recommend (which will be never or close to).
07-14-2020 04:31 AM