Asus PG329Q problem after update to bios v036

[Ð_Ð_Ð_Ñ_ÑŒ_Ðœ]

Hello, I apologize in advance for my English. Guys I updated my monitor to v036 and that was my biggest mistake...

I lost the ability to use 2560x1440 120 MHz + 10 bit (although it was because of this characteristic that I bought this particular monitor)

The brightness has dropped noticeably, and dynamic dimming is now practically not working, it's just awful

Bottom line: If I used to like hdr, now I can't look at this terrible picture. I ADVISE DO NOT UPDATE YOUR MONITOR TO v036!

Tell me, is it possible to install v034 back and where can I get it?

[marceeu]

�˜�³�¾Ñ€ÑŒ �œ wrote:
Hello, I apologize in advance for my English. Guys I updated my monitor to v036 and that was my biggest mistake...

I lost the ability to use 2560x1440 120 MHz + 10 bit (although it was because of this characteristic that I bought this particular monitor)

The brightness has dropped noticeably, and dynamic dimming is now practically not working, it's just awful

Bottom line: If I used to like hdr, now I can't look at this terrible picture. I ADVISE DO NOT UPDATE YOUR MONITOR TO v036!

Tell me, is it possible to install v034 back and where can I get it?

Hello, for the 120hz and 10bit you can create a custode resolution usino your graphics card panel and set 4:2:2 10bit limited

[Ð_Ð_Ð_Ñ_ÑŒ_Ðœ]

marceeu wrote:
Hello, for the 120hz and 10bit you can create a custode resolution usino your graphics card panel and set 4:2:2 10bit limited

When 4:2:2 is turned on, the image seems to double with a blue tint. By the way, earlier it was possible to set 4:4:4 and then the image did not move

[Istoir]

�˜�³�¾Ñ€ÑŒ �œ wrote:
Hello, I apologize in advance for my English. Guys I updated my monitor to v036 and that was my biggest mistake...

I lost the ability to use 2560x1440 120 MHz + 10 bit (although it was because of this characteristic that I bought this particular monitor)

The brightness has dropped noticeably, and dynamic dimming is now practically not working, it's just awful

Bottom line: If I used to like hdr, now I can't look at this terrible picture. I ADVISE DO NOT UPDATE YOUR MONITOR TO v036!

Tell me, is it possible to install v034 back and where can I get it?

I support, on the previous firmware it was possible to use 2560x1440 120 MHz + 10 bit 4:4:4 FULLRGB.
You need to either add it to edid, or provide the firmware in which this feature is present (there is no older firmware to download from the monitor support page).