New driver and FW for aquantia 107

[Hopper64]

On the Marvell site, looks like new FW and driver 109 and ....21 respectively. **https://www.marvell.com/support/downloads.html

[Hopper64]

Installer for the driver worked fine, but the FW did not.

[Dimitrios1971]

Hopper64 wrote:
Installer for the driver worked fine, but the FW did not.

It is normal for you that the FW does not work on your motherboard.

Supported devices
================================================== =====================
Motherboards with 10GbE / 5GbE
ASRock Fatal1ty X299 Professional Gaming i9 XE
ASRock Fatal1ty X399 Professional Gaming
ASRock Fatal1ty X370 Professional Gaming
ASRock Fatal1ty Z370 Professional Gaming i7
ASRock X470 Taichi Ultimate
ASRock Z390 Taichi Ultimate
ASRock Fatal1ty Z270 Professional Gaming i7
ASRock Z270 SuperCarrier


NIC, TB3 dongles, and TB3 docking stations
Aquantia AQtion 10G Pro NIC
Aquantia AQtion 10G Gaming NIC
Aquantia AQtion 5G Pro NIC
Aquantia AQtion SFP + NIC
Gigabyte GC-AQC107
Promise SANLink3 N1
QNAP QXG-10G1T
QNA-T310G1S
QNA-T310G1T
Sonnet Solo10G SFP + Thunderbolt 3
Sonnet Technologies Solo 10G Thunderbolt 3

Example updating a NIC with 3.1.58 firmware to 3.1.109


And drivers
Change log:
v2.1.021.0
---------------
Date 05.03.2020

- Fixed checksums which were reported to OS for packets with non-zero padding

Supported OSes: Windows 7, 8, 8.1, 10, Server 2012/2016/2019
Supported devices: AQC100, AQC107 / 108, AQC111 / 112
AQC100S, AQC107S

[Hopper64]

Yes. I misread that. Thought I saw Asus X299... Was in a hurry when reviewing that. Thanks. 🙂

[broncogr]

You can still install the firmware if you so like.
Use the flasher from this thread https://rog.asus.com/forum/showthread.php?116080-Aquantia-10G-3-1-100-Firmware-Update
move the 3 .clx files from the 109 firmware to the above mentioned flasher and rename them to the names expected in the xml file or edit the xml file with the new names