OMGDrAcula wrote:
When I go to customize my color settings on my claymore using a custom wave the top orange pattern works, and the bottom rgb one works, but the one in the middle that is blue and red just applies the same orange one that is above it. The blue/red pattern previously worked
Sounds VERY similar to the issue I have had since purchasing my Gladius II back in June 2017, the mouse it's self works fine, but something screws up with the lighting...
Weather its Armoury or the firmware, i'm not sure....
if you have "sync all areas" set to OFF, and select different effects for each zone, clicking between zones along the bottom doesn't update the UI's "selected effect" list with the actual currently selected setting...
I have my scroll wheel on 'colour cycle' (base Reactive, logo static) - and on reboot, the scroll wheel is either turned OFF totally, or on a single, static colour (while the other 2 zones are as they were set)
I did notice also, that when switching profiles with the buttons on the mouse, if I go profile 1 > 2 > 3 > 1 - they seem to 'work' (still static wheel though), but if I reverse order (1 > 3 > 2 > 1) the effects are messed up (the base zone seems to be Cycling AND reacting)
