crossair V formula Z cant get over 1000MHz with corsair vengeance 2400MHZ memory

[ibwaheemi]

mobo crosshair V formula Z
CPU AMD FX 9590 (water cooled)
memory corsair vengeance pro 2400MHz (PC3-19200) CL11 (11-13-13-31) 1.65V
GPU HD7970 matrix platinum (water cooled)

Does anyone know any good settings for this memory ive tried many but get an OC error on boot up. Even when it boots into windows the DRAM frequency is v low

can anyone recommend good settings?

[EllipticDawid25]

u tray use seting save on memory bone in D.O.C.P mode ?

[ibwaheemi]

i have been using DOCH mode and also changing the dram frequency to various settings ranging from 2400 all the way down to 1333MHz but still i can only get 800MHz out of the DRAM with NB frequency at 2200MHz. i think i have used every possible combination in that mode and no luck.

i dont want to alter voltages or timings as im not knowledgeable enough to do that i dont want to fry my RAM

also i have turned off ECC setting

[ibwaheemi]

i fixed it. i hope posting it will help other who bought vengeance pro memory at 2400MHz

using DOCH mode and selecting the convenient profile made for the memory by the motherboard. then goto advance timings below that setting and you will see that the motherboard has given the wrong timing ( it should be 31 not 35)

[EllipticDawid25]

Good man 🙂 Hope you help somebody 🙂