Help
Overclocking & Tweaking
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

RealBench Insisting I don't have Enough Ram?

New to RB and I'm a bit confused...Have a 3500U / Vega 8 / Win10 system with 8GB of ram (2 being dedicated to the Vega), yet RB won't run insisting I don't have enough ram even with no other programs open? Is this correct and Winderp is really using ...

boddole by • Level 7
  • 7289 Views
  • 1 replies
  • 0 kudos

Crashing on stable PC..

I've had this PC for a year now at 4.4ghz 1.25v. I noticed it was down clocking under heavy load to maintain the 95w TDP so i just unlocked all that stuff, turned off speed step. Ran realbench and it crashed at 10 mins. Never had stability issues ...

Base Temps for a Noctua DH-15S on a 4790k?

I recently installed this after finding my water cooler too loud. It seems this fan even on low airflow is a bit louder than I wanted... But as a sanity check I thought I'd talk to others first. My base temps are in the 40-45C range. On my watercoole...

RedIron by • Level 7
  • 6927 Views
  • 1 replies
  • 0 kudos

Reinstall BIOS (not update) Safe?

So I proceeded to update the BIOS of my Gryphon z87 in order to use the 4790K CPU. I did so on the usual manner using EZ flash 2, then installed the CPU but the board gave me a CPU error and couldn't boot.Reading a bit it seems there's only one way t...

Dogway by • Level 7
  • 3908 Views
  • 0 replies
  • 0 kudos

PPL voltage too high

Asus Maximus XI Hero motherboard with Intel 9700k shows the processor PPL Voltage at 2.6 volts when the multiplier is set at or over 53. Fine at 52 the chip can run stable at 54. Don’t understand why or how to adjust that voltage.

Jec3504 by • Level 7
  • 2455 Views
  • 6 replies
  • 0 kudos

How to change fan speeds with temperature?

Hi, I have a ROG GL720VM 7th-gen laptop that comes with ROG Gaming Center, but the auto fan controller does not go as high as I want it to go. It reaches 4000RPM ish at 80C with a max of 6000RPM I can do manual. I found that Asus has a program to con...

Crosshair VII Hero no longer allows Ram overclock.

Hey everyone,I updated my mobo to BIOS 2501 the other day, and also upgraded my CPU to a Ryzen 3700x. However, I cannot set the D.O.C.P ram profile any longer. I'll get an un-documented "C5" error on the mobo if I try to and it'll stay stuck on post....

PLL termination voltage?

HiIn order to tweak my OC a bit I wondered if it was useful to "fix" the parameter PLL termination voltage, I readon some forums that it could prevent the particular heating. On an ASUS motherboard with an 8086k processor what value should I put, I h...

Asryan by • Level 10
  • 2337 Views
  • 1 replies
  • 0 kudos

VCCIO and system agent voltage

Hey, I am running an overlocked system on my Z-370F motherboard with the 8700K @ 5.2 GHztogether with 4 sticks of G.Skill OC'd @ 34000MHzMy CPU core voltage is set to 1.420 - however, I have no idea what values to run on my"VCCIO" and "system agent v...

Crosshair vi hero. Ryzen 2700 issues

i dont know where to post this question but its a huge issue. i have a ryzen 2700. Crosshair vi hero x370 motherboard.gtx 1080 ti and gskill 3200 flare x ram. Windows 10. my build was running GREAT. its got a custom water loop and everything.All thin...