Hi guys,I've been trying to get my OC stable. I can't go any further than thisCore multiplier: 42x (sync all cores enabled)Vcore: 1.2V manually set in BIOS RAM speed: 2400MHz RAM timings: 11/12/12/30/2T RAM voltage: 1.65VInput Voltage: AUTOExtreme Tw...
Hi there! I have a motherboard ( MAXIMUS III FORMULA ). When I try to boot up, I see the Republic of Gamers logo. Then the next screen comes, showing status of USBs, harddrives etc detected. But then I have NO KEYBOARD DETECTED. I have tried with PS/...
Should I have IRST enabled when not using RAID or hybrids? Not sure if it really affects performance when not using either technologies.
I just turned on my IMPACT MB and am unable to get it to boot off the DVD drive. I have built numerous systems but I believe I am missing something with regards to the BIOS settings.ASUS IMPACT MINI MBINTEL CORE i&-4770KCORSAIR VENGEANCE 16GB DDR3 16...
So, I tried to oc my 4770k to *46 with 1.2v, it didnt post and so on until I decreased the multiplier to *42 still on 1.2v which are my current settings, Don't know if this is one crappy cpu or if I did anything wrong, which I believe I didn't becaus...
http://rog.asus.com/65842012/guides/sub-zero-overclocking-motherboard-preparation/:cool:
Recently purchased Z87-Pro with i4770k, 32 gig crucial ram, ausus dsx audio card, gtx 770 nvidia graphics. Not overclocked, normal and automatic settings in uefi. Multiple different installs of windows 8 64-bit. Different versions of the chipset sof...
Hi everyone,I've had my Rampage IV Extreme board for about 5 days now and I noticed the PCH fan never turns on. I assume it comes on when it needs to? I ask because right now my motherboard is reporting a temperature of 96 - 99C. I know there's a sep...
My monitors res is only 1600x900. I am planning on buying a Sapphire 7970. I kind of forgot about my res, so is this card just a waste? i can always just upgrade my monitor in the future, but I dont know. Im guessing with that 7970 I will max out all...
Hello to all!I'm experiencing some problems with VRM temps. HWInfo64 shows 72-73°C on VRM (it shows 72-73°C under designation Temp5 - but i'm assuming that, that are VRMs, because they are hot as hell, if I touch back side of the board, where lies v...
