Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Still pushing my R3E

Hi everyone,So, I'm still pushing my R3E and i7 980x. I've seem to hit an overclocking wall due to my skills/experience. So I'd like to reach out to those who know. Here is what my system is currently running at:CPU-Zhttp://valid.canardpc.com/2898719...

Gawlron by Level 7
  • 6799 Views
  • 5 replies
  • 0 kudos

Raid issues

My pc has been running fine since its completion early in april and now my raid config is starting to fail.1 SSD is failing and it crashes every 1 hour, since the raid runs the OS it causes my whole PC to crash.The SSD's are Crucial m4 64GB x2.Will I...

Dinnr by Level 7
  • 4220 Views
  • 3 replies
  • 0 kudos

RIVE no post or Debug LED

My build contains a 3930k, a gtx 780 and 16gb 2133 corsair dominator platinum ram. I'm not getting a POST from my video card nor will the debug LED tell me what's going on. I doubt this board is DOA, I already went through hell for my previous one so...

Shindo by Level 7
  • 8454 Views
  • 10 replies
  • 0 kudos

Doubts about OP_FAN, CHA_FAN and CPU_FAN

I'm about to buy a motherboard ASUS Z87 DELUXE. I'm new to this, but I would like to know the differences between OPT_FAN, CPU_FAN and CHA_FAN. The only thing I know is that one of them can be controlled by the BIOS, but is there any other difference...

Help with 3930k

Sorry for my English I'm helping with google translator: DWell I just bought a computer with a core i7 3930K 3.2ghz processor and a motherboard ASUs Rampage IV Extreme. My question is, if the processor is 3.2ghz, why is running at 1.5ghz and then be...

Canalla by Level 7
  • 4955 Views
  • 3 replies
  • 0 kudos

Interesting issue with Corsair Dominator-GT 1866 memory

Hi,I know there are a ton of memory related threads on this forum (as well as on Tom's.) I think mine might be a bit different though.I purchased a 32GB (4x8) quad channel kit of Corsair Domminator-GT 1800Mhz memory and installed it in a brand new Ra...

nfries by Level 7
  • 7781 Views
  • 12 replies
  • 0 kudos

Offset V/f mode

Can somebody please explain how to use this ?I run stable at manual 1.3V and 4.4 GHz...Still room to go up...I tried an offset of -0.300 ( thinking that this will bring the voltage down to 1.000V when there is no load)Overclock failed.What did I mis...

BrzIROG by Level 7
  • 8691 Views
  • 12 replies
  • 0 kudos

Hard Drive Duplication

Hey all im upgrading to the new Asus Raidr express SSDcan any1 recommend any good free software to duplicate my current RAID0 harddrive setup so i dont have to do a full reinstall?thanks