Hi. I'm attempting to undervolt my Coffee Lake CPU Intel Core i7-8700K (8th generation) which is on the ASUS Prime Z370-A motherboard on Windows 7 (I bought this configuration thanks to info I've seen on phoronix) and I was wondering how to transfer ...
Hi allI'm new to this, but hope someone will help me see if I can get my computer to run stable with full speed on my memory and 5 GHz on the CPU - or at least 4000 MHz on the DRAM frequency.My setup:MB: ASUS ROG MAXIMUS XI HERO (WI-FI)CPU: I7-9700KM...
Apologies in advance if this has been asked a zillion times. I searched in the forums, but everything on here seems to be for newer stuff.How do I know if I need to raise other voltages besides my main CPU voltage to either avoid a bottle neck or get...
This is a new R6EE + i9-10940x running Windows 10 with UEFI Optimized Defaults. The board has not yet been overclocked.I believe this board has a defect with how the 0603 BIOS is controlling the load line voltage. For some reason, XTU reports cu...
I'm only able to set this Voltage Offset of "CLR (CBo/LLC/Ring) Overclocking" (as seen in hwinfo64) aka "LLC/Ring Offset" (as seen in hwmonitor) by using Intel XTU, as can be seen in the screenshots in my other thread here: https://rog.asus.com/forum...
If I change CPU Core/Cache Voltage to Adaptive Mode, then reboot, I see the following:then I try to change the Offset Voltage value by typing some numbers(without pressing Enter, yet), looks like this:but then, after I press Enter it reverts to Auto ...
Hello.*We are on LN2 with*asus rampage xii formula ln2.But if we go over 1.39 pll volt Windows cant boot. It crash. We need to go to 1.6 or more for no cold bug on 10900K.Any advice?*
Hi*Can someone help me ? I got this dram trident z rgb F4-3600C18D-16GTZRX - when I tried to configure the settings in ram (2133 to 3600mhz) it wont bootup so I tried to add some voltage in my dram (1.350 voltage) after all tries it wont reallt bootu...
Having an issue with Asus Z390 MoboI frequqently spend long times away from PC, but when checking the cpu-z it almost never detunes the CPU(Speedstep)I want to to do this as its just wasting money and creating excess heat.Have tried enabling it in bi...
Hi everyone,Since a few days, I am trying to get a slight OC (4,7Ghz@1.225v BIOS) on my I7-7700K, but as it is a hot chip, I am quite confused by the very disparate results I get from a stress test to another, especially about temperatures.What softw...
