Hey all,Im having issues with the built in AX wifi on the x570-i Strix Gaming board. I've deleted the wireless drivers, reinstalled them, rebooted the machine, set static parameters for ipv4, enabled DHCP, and Im still only getting 15-20 Mbps on an u...
Asus x99m ws (latest bios 4001)4x8Gb corsair lpx 3200The cpu is currently running 4.4, with only xmp profile and offset of +0.250 vcore in bios. So I thought it was stable, but running BDO (black desert online), I get hard locks after a couple of min...
Hello @NodensIs it possible to have a CPU-Z update, so that RealBench "recognizes" the latest CPUs ?I tried to do it myself, but I got an error message "Program Files modified or corupted" in the RealBench windowThanks
I've been trying to dial in an overclock lately and I've hit a wall. My motherboard is a Maximus 7 Formula. So my CPU (4770k) is a bad overclocker, I tried 4.3Ghz and it took over 1.35V to get it stable. So I decided to drop it down to 42x on all cor...
I am using Corsair 2x8Gb 3200 MHz RAM. When I set the XMP I notice that my VCCIO voltage changes to 1.312v and my SA voltage sits at 1.2v while both are set at auto. Should I trust these voltage as the VCCIO voltage especially is a bit high for my li...
Hey guys. I installed a 1tb wd black m2 ssd. The WD software is telling me that the drives capability is PCI 3.0 x 4 but the running speed currently is x 2. When I went into the bios of my motherboard, I saw nvme was greyed out where my SSD was liste...
Hi,I recently got an nvme and installed windows on it but I don't see a big difference for windows boot. Some people claming they boot in few seconds, i boot in like 11 seconds. I know it's fine and all but i was wondering what I could improve to ge...
Hi,I have my chip at 5ghz all cores running with good results, temps are fine (less than 80c on prime for few hours)I wanted to know if I could tweak more some settings and if you guys think some stuff are not optimized ThanksXMP 2Sync all cores 50 ...
Hello I have purchased a ROG Maximus XII Formula and I am trying to set it to register the 4000mhz DD4 memory that I have installed but I am having difficulty doing so. Could someone help me.Thank You
Hi,Problem started after I finally decided to go with microcode update ,last bios update to 4101.Now won't apply ram & cpu system agent voltages.Bios reflash to old version does not fix it.I would need ram adjustment to allow running 6x8gb ram sticks...
