Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Tuf Gaming Z490 Overclock

I've never OC'd a cpu, and due to my lack of understanding, have had to resort to paying the $20 insurance fee to intel, to use their Performance Maximizer. I've got a 10900KF on an Asus Tuf Gaming Z490 wifi. It got me a 5.2 passing, but throttled it...

JLB by Level 7
  • 1387 Views
  • 1 replies
  • 0 kudos

Maximus XI Formula - Dual water loop control in BIOS?

Hey folks,Finally finished my dual loop build, and am trying to determine a good way to control the rad fans and pumps via BIOS. Everything is PWM. I'm on BIOS 1802. Currently I have the following set for each loop:CPU fan -> CPU/CRM pumpChassis f...

87493 87494 87495

Maximus XII and Viper Steel 4400mhz RAM

I am using 4 x 8GB sticks of Patriot Viper Steel DDR4400 along an i9 10850k and a Maximus XII board.I can only get it to run at 4133mhz which is expected and with the timings below.Voltages I have 1.47 DRAM and 1.30v for VCCIO and SA and I have loade...

ROG STRIX Z490-E Display Port not working

Hi,I'm currently without a gpu and i'm trying to connect to the display port of the motherboard and use my intel i5 10600k Internal gpu.HDMI output works fine but displayport seems to be dead, i tried different monitor and different cables but nothin...

Need help with Ram DOCP on 570-E

Hello peepsI'm trying to see if i can use my ram sticks to 3200 atleast on my rig but to no avail, i get BOSD or random freezes.I have read around that there are ways indeed to stabilize this with some tuning but i have no idea on this Can anyone he...

Stamos by Level 7
  • 1049 Views
  • 1 replies
  • 0 kudos

z390-e STRIX VCCIO + VCCSA Voltages

Does anyone know why the bios would override manual inputs for these voltages? See pics below.I've dialed in stable CPU and memory overclocks. OCCT for system stability and HCI MemtestPro for memory stability (400% coverage with current 17-19-19-39 @...

Crosshair VIII Hero can't change core voltage

Under AI Overclock, I changed it to manual. I then go down to the core voltage and change it from Auto to either "Offset" or "Manual", but in either case, it doesn't let me change the actual values for the voltage in the section that comes below it. ...

ROG_EXT Y-Splitter for OC Panel & Front Base

Has anyone developed a motherboard Y-Splitter for the ROG_EXT Connector that will allow both the OC Panel & Front Base to be connected ?Is this concept technically possible ?I have my case open and am looking straight into the motherboard area where ...