Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Z690, AI overclocking

Hi,I installed AIl Suite 3 and was curious about what my machine was able to handle via this simple interface. All Suite 3 is now set on CPU speed +68%, impressive but not necessary, so how to I turn this off?Ps: All Suite also gives this pop up on s...

Crasje by Level 12
  • 1013 Views
  • 1 replies
  • 0 kudos

Better setup for OC G.Skill 4800mhz CL20-30-30-50

Good morning,I have the following setup:MB: MB ATX Asus ROG Crosshair VIII Hero (Wi-Fi)PSU: ATX Asus ROG Strix 850W 80 Plus Gold Full ModularCPU Cooler: iCUE H100i H115i H150i Elite CapellixCPU: AMD Ryzen 9 5900xMemory Bios OC: D.O.C.P.Bios Version: ...

Can`t OC my Gskill DDR5-RAM 6600 MHz

Hey;I am new here and i have issue with my new G.SKil Tritent Z DDR-5 RAM 6600 MHz.I cant OC it to 6800. I have tried the VDD and VDDQ to 1.25 either.But what is a little bit funny.. The voltages is 1.40 I have also tried to raise de System Agent to ...

Ddr5 issues with xmp on z690 with all bios

Hello everybodyI bought few days before STRIX Z690-G with 12600k with 2x8GB KINGSTON DDR5 KF560C40BBK2-16 that is on QVL list(6000mhz CL 40-40-40-80 1,35v)First of all im running the 12600k at stock settings with windows 10 pro 64 bit.After a lot o...

Problem running stable using XMP

I have a system where any time I try to enable XMP, it posts, but about 30 minutes to an hour into Windows 11, I get the BSOD. I'm not sure if there are any other settings that might need to be changed in the BIOS to run stable, but if anyone has any...

rolldog by Level 9
  • 837 Views
  • 0 replies
  • 0 kudos

Alder lake cpu socket mod?

Hey everyone, not sure if everyone knows but apparently there's a well known issue with the retention bracket putting too much pressure on the ihs which causes warping and a gap between the chip and cooler. I was wondering if I should put some wash...