Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Ryzen 1.5Ghz bug

Are other people still getting this bug? I have the Rog Strix B350-F. I believe I have the most recent bios from April or May installed but I still can't seem to overclock in my bios without getting the bug. I've heard other board manufactures hav...

jtr616 by Level 7
  • 1363 Views
  • 1 replies
  • 0 kudos

First delid. Question about IHS

I delid my first time with the i9 7980xe. The square on the ihs is larger than the die. Will this cause a problem? Here is a picture. I'm confident I used the right amount of LM. Just curious if the square size would matter. The components are c...

Fx9590 cpu/nb and ht link guide

Discussing water flow, it is simple to swap from spray to flow working with the toggle button on the rear side. With all the lever that is single, you'll be able to switch between warm and cold escapes.You simply will need to move your hand over the ...

sage12 by Level 7
  • 1177 Views
  • 0 replies
  • 0 kudos

bios grey out

Hi all i have a ROG Grosshsir Vii hero wi-fi. I cant oc my cpu or adjust the volt or multiplier as it is grayed out and cant change any of cpu but can change the ram setting but not the volt either. Please any help

Need help in overclocking on ASUS ROG Z270

Hellou everyone, im new on forum and i dont know too much about overclocking so i need recommendations. I've got 16 GB RAM 2x8 GB 3200 MHZ, processor Intel I5-7600K and motherboard from the title (others in my profile).. So what is best settings for...

Strix Z370-F new bios feature?

Just flashed the new bios, and a new option under VID Behavior called "Intel Fail Safe" poped up. What does it do? Does it influence in overclocking at all? Thx in advance.

Asus maximus x hero issues

Hello ROG forum,I recently upgrade from AORUS Gaming 7 to Maximus X Hero and I'm facing some issues regarding the BIOS as this is my first time using a ROG Enthusiasts board and some features are unknown to me. All I care about is to run my CPU to In...

wake on lan not working

I'm trying to configure the wake on lan on a x299 using teamviewerI can't get it to work at all and I don't know what to try anymore I have Enable Power On by PCIE on uefi fast startup is off on network card wake on magic packet is checked on latest ...

apeiron by Level 7
  • 1423 Views
  • 0 replies
  • 0 kudos