Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

whea uncorrectable error

hello everyoneim having an issue that i cannot seem to solve..for starters let me share my system info;CPU: INTEL i7 4790K (running on 4GHz default)GPU: 1x NVIDIA EVGA GTX960 SUPERSCRAM: 8GB KINGSTON HX324C11T3K2/8 HYPERX BEAST (running on default NB...

Asus Maximus Vi hero 3.7 Ghz instead of 3.9 Ghz i7 4770

Hello to the Rog community!I have a problem when upgrading to latest bios 1603. The CPU goes only turbo boost in 3.7 instead of 3.9. Only in bios 1402 goes 3.9 as it should be.I factory reset nothing happened. All set to 3.9 multiplier and all sync c...

49090
chrs1984 by Level 7
  • 4186 Views
  • 10 replies
  • 0 kudos

EZ update VII Formula

Whenever I open EZ Update and press connect, it doesn't even scan and immediately says "There is no need to update the environ."

Z97 Max VII boots with Q 76

I'm dead in the water here. getting a Q76 code .... I have disconnected everything and tried to boot to the bios nuthin ... locks at 76I swapped cpu's nuthin. My PS powers up and controls my fan controller. My pumps run no issue. Even when my 980 KPE...

Perko by Level 8
  • 1883 Views
  • 3 replies
  • 0 kudos

Quick shortcut for hard drive selection at boot ?

Good evening.I have 2 SSD connected, both with a different OS on it. When I boot, my first HDD is booting, great. But each time i want to boot on the other one, I need to go trough the UEFI bios, to override the boot at the bottom of the "boot" secti...

artik by Level 7
  • 36547 Views
  • 5 replies
  • 0 kudos

P0 error. No Q-code table. (see image)

I have a new asus maximus vII hero motherboard and it starts when it wonts. When starts puts on q-code screen P0. The 2nd digit appears incompelte.I have made all the possible tests, power supply, memory, processor, conections, etcWhen it puts on, w...

Maximus VI Hero - Disabling Secure Boot?

Is it possible to completely disable secure boot on the Maximus VI Hero?I switched Secure Boot to Other OS, but the gray text indicator above it still says "Secure Boot state........Enabled".I've been trying to install Windows 7 x64 on my system with...

Ranger vii compatible with kingston savage ddr3?

Hi all , i have bought my first rog mobo:D a Ranger Vii. i was advised to buy this low profile ram to fit under a nhd15 in a c70 case. unfortunately i think i may have had bad advice, and have ordered some non compatible ram..the ram is Kingston sa...

greg12 by Level 7
  • 3461 Views
  • 5 replies
  • 0 kudos

Asus Maximus VII Impact crashes

Bought myself a new computer a month ago, with the following specifications:Intel i5-4790kAsus Maximus VII Impact EVGA GeForce GTX 970 SCOCZ Vertex IIKingston HyperX Savage 2400 MHz 2x8 GB (HX324C11SRK2/16)EVGA Gold rated 500W PSU (EVGA Hadron Air)It...

Ammonia by Level 7
  • 7496 Views
  • 7 replies
  • 0 kudos

GTX 970 SLI Problems

I have the Asus MAXIMUS VII HERO ATX LGA1150 Motherboard and am trying to setup two way SLI with 2 GTX 970 cards. I have the SLI bridge connected, but my computer is saying that I don't have the bridge connected (as pictured below). Also my computer ...

48911
neofire by Level 7
  • 6156 Views
  • 5 replies
  • 0 kudos