I am having a lot of problems with my VIdeo cards. I am sure that 1 if not both are possibly bad. I think I have figures out a way to boot from the second card without having to remove a card which would mean I would have to drian that loop of the ...
Hi,My previous post was obviously way too long and confused to get any replies. So lets go with the essentials.Both the first pcie slots on the MVE are electrically x16. Would there be any kind of stability/compatibility/performance issues of putting...
These new 'Fast-Boot' Bioses provide Fast boot option to speed up boot times especially at resets.You can adjust post delay time to be longer (if for example you find it hard to enter BIOS)You can disable Fast boot to make it post not as fast during ...
Hi i was hoping for some help in speeding up my boot times from a complete shutdown. Currently it takes about 30sec or so to get to the point where i can start to click icons/web. I am using an ssd and was hoping for boot times closer to 10sec or ...
I feel this deserves a thread, as the experience may vary.I have been testing R4E bios.namely from 1005 to 1305I have found my Vcore requirement to be higher in 1305.I am not very sure is this entirely because of the BIOS, but it did happen on the sa...
Hi all,I've had a few BSOD today and when doing some intensive applications. So then I decided to run prime 95 and it is giving me 101 error BSOD errors. Could this be degradation as this chip as always needed more voltage that most. Seems stable at ...
Hi,I have a Rampage IV Extreme motherboard and twin HyperX SSDs in RAID 0.I recently encountered a problem with my PC crashing hence wanted to undo my Overclocking to indentift whether it was an issue with the Overclock (i7 3690x at 4.8GHz).I went in...
So. I have the Maximus IV Extreme Z motherboard. A few months ago, I purchased an SSD, (OCZ AGILITY 3), to use primarily as a boot drive and also loaded a few games. Games load fast, and after running ATTO, the SSD is performing well in read/write sp...
. I have looked in the box, cant find itIs it not shipped with the board????Can some please spread some light over the situation?i think its a great function, and will use it later on..
I just got the FX 8150 and wow, this thing is hot. I used the stock fan with it and it is around 45c idle. If I run Prime 95 it slowly goes up to about 61c and then the system reboots (seen that happen around 55c with Prime95 at work). No blue scr...
