I have 4 drives. 1 SSD, 2 HDDs, and 1 Optical Drive. Only my SSD and Optical Drive show when I enabled CSM, but not my HDD. Can someone please help? Here are the screenshots of it with CSM enabled.https://imgur.com/a/4mregup
Hi,So I recently ran into serious performance issues with a game (Wreckfest) and I couldn't make out why that game out of all was performing poorly. After about a week of troubleshooting, someone asked med to check my linkspeed. Voilá, for some reaso...
Hey guys,was just wandering if anyone could clarify what sort of graceful degradation the expansion card has , specifically if it will work as an m.2 adaptor for a single ssd with a rog m6e. i ask as the price is only 30-40% more than a no name brand...
PCI Simple Communication Controller Driverwhen I try to download it it says IMEIintel management engine interface this platform is not supportedwhen I download it it says platform is not supported ?!!
Hello,What is temp's temp2,temp3,temp4,temp5 show in HWiNFO or Corsair Link?
Hi all,I need help to install an Asus ThunderboltEX3 coming from an X99 DELUXE II but never used before.I followed the basic steps found on the TBEX3 manual:1) Donwloaded from Asus support website Intel_Thunderbolt_AR_17.2.71.250_20171205 driver and ...
I've noticed in hwinfo64 in the sensors page is V1 and it looks to be one of my vcore settings because it is the only sensor that drops to like ~ .8 volts at idle and way over my set vcore at load. For example my vcore in bios is set at manual static...
Greeting everyone. I'd complete update new Intel microcode according to Intel SA-00115 guidance below.https://www.intel.com/content/dam/www/public/us/en/documents/sa00115-microcode-update-guidance.pdfNew RAMPAGE IV EXTREME 4901 MODDED BIOS For Sandy ...
Having trouble trying to fix this. When I shut the system down, whether from Start menu or Pwr button, the case and cooling fans keep running. The only way to turn them off is to shut off pwr. I've reset CMOS via the jumpers, R&R'd the battery a...
Thanks beforehand for reading and any insight you might have into this problem.I've been dealing with an issue with my system's power up / boot process.Currently, when I start up my system, roughly over half of the startups result in a boot loop (or ...
