Intel 700 & 600 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Make Future Motherboard Feature Suggestions Here!

Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...

xeromist by Moderator
  • 16994 Views
  • 138 replies
  • 84 kudos

Z690 new 6 pin 12v on Maximus

Hello,Looking at pictures of the Maximus boards. They have a 6 pin cable connector next to the 24 pin. The manual states it's needed for 60 watts on the Pcie 5 slot for the graphics card. If not used then only supports 27 watts. Does this need to...

kahless by Level 7
  • 21019 Views
  • 14 replies
  • 8 kudos

Long BitLocker Unlock Times - I Suspect Drivers

Hi All, on my 690 Hero I have a couple of HDDs which are Bitlocker encrypted. Everything still working fine, but instead of them unlocking almost instantly, they are now taking 10-20 seconds. The only things I changed before this starting happening w...

JohnAb by Level 17
  • 739 Views
  • 7 replies
  • 0 kudos

Motherboard error code z790-e

Hello ! My motherboard displays a lot of different error codes and I don't understand why. I made a video of my error codes. On the other hand my pc works very well, I have no problem on it... Can someone explain to me?Thanks a lotMy computer : i7 13...

Z690 ddr4 how to enable usb power?

I have a new wireless headset. The headset wont charge when the pc is off. Erp is enabled in my bios because if i disable it my mouse rgb is on all the time, how can i charge my wireless headset without disabling erp? Any ideas? When i enable usb pow...

Z790 Hero 13900KS not letting me run at default PL1&2

For some reason my Z790 Hero when I have everything at default with MultiCore Enhancement disabled my 13900KS is not sticking to it's default PL1 and PL2 Limit as it is setting both of the limits to 320.0W.I can not get the chip to run at stock could...

97277
USERMAC by Level 9
  • 7975 Views
  • 18 replies
  • 0 kudos

Z790 Apex Driver question

Do you guys normally install GNA and Serial IO drivers on a fresh windows install or do you usually leaves those out and install later if you need them? Also, would you say it makes sense to install Chipset or ME driver/Firmware first? Thanks!

robb543 by Level 7
  • 3011 Views
  • 11 replies
  • 0 kudos