Newegg listing November 2nd and 3rd:Newegg listing November 4th, today:Did Newegg sell out their known incoming quantity of boards as Pre-Orders in 48hours? OR did they simply change the purchasing status?Who knows right?Did anyone grab a pre-order?
BitLocker-API events from eventvwr report that "BitLocker determined that the TCG log is invalid for use of Secure Boot. ", also "BitLocker cannot use Secure Boot for integrity because the expected TCG Log separator entry is missing or invalid."I loo...
I noticed that all audio apart from frontal left and right is very low. I am speaking about central, subwoofer and rear left and right audio. To compensate i am increasing of + 10 decibel the settings on realtek audio control. Any ideas?
Hi everyone, - Realtek Audio Drivers (UAD - ASUS ROG SS3) : Drivers : 6.0.9514.1 WHQL [09/05/2023] SS3-SSVM Extension Driver : 1.3.18.0 WHQL [13/07/2022]SS3-SSVM VAD Media Driver : 1.0.3.0 WHQL [07/06/2022]SS3 APO SoftwareComponent Driver : 3.5.6.0 ...
Hi, Plugged in the 3.5 at the back of the pc. Sound is noisy through everything i connect through that port. Even after updating the Firmware to Audio ALC4080/ALC4082 FW with the update tool on the support page (released on 26-12-2022). Front port i...
Hi all, I just finished putting together a new build but I have a big problem and I've been freaking out all day.I9 13900KAsus Z790 HeroGskill Trident Z5 DDR5 CL-34 RamStrix 4090 OCWhen I turn on the PC it does not give a video signal and the Q-Codes...
BIOS can recognize the 2 SSD on hyper M.2 card, But when boot into windows 11, only one was recognized by OS. The previous BIOS doesn't has this issue. Also I found other guys in overclock.net reported the same issue. And proably it may related to ...
Hi,I bought a used z690 apex, it was working fine, however it is having some issues now:1) d6 q code. It pops up almost every time I try to boot the system. According to Asus manuals D6 error means No Console Output Devices are found. The GPU is plug...
Hi, I currently have some items set in my BIOS (non OC things). I have seen 2 video's and see that it is very simple to turn OC on. They suggest to then do a stresstest. What if you are not happy with that result and want to go back to what you have...
I found out that the Arctic Arctic Liquid Freezer II destroy the connections to the memory and that is the cause of the error when the board does not boot when a memory stick is inserted. Right now I'm not 100% sure if it was channel A or B, but one ...
