12-29-2022 11:35 PM - edited 07-21-2023 03:48 PM
-----Updated-JUL 20. 2023-----
I used a following USB 2.0 adapter.
4 Port USB 2.0 Slot Plate Adapter, USB panel.
Used Headers: 2 Headers.
Reason: USB Header bug or MB bug itself. We can't say it is Compatibility issue , because it happens only with certain Firmware versions 1601, 1701, 1801. I've tested it with other ASUS MBs. They work fine, no issue at all. But only Z590 APEX has this issue. Old firmwares work fine except 1601, 1701, 1801. It means this is ASUS's fault.
Solution: Remove 4 Port USB 2.0 Slot Plate Adapter, USB panel.
-----------------------------------------------
Issued BIOS Version: 1601, 1701, 1801.(1402 works fine)
Motherboard: Maximus XIII Apex Z590.
Booting Error message: "The computer case is open. Please make sure the computer case is closed properly
then press CTRL + ALT + DEL to continue.
Fatal Error"
This motherboard doesn't have anything about 'Case(Chassis) intrusion function'. There is no BIOS option for it. There is no Header for 'Intrusion' on the motherboard.
Nothing works to solve this issue. I did following things.
1. Clear CMOS with a jumper.
2. Clear CMOS with a battery.
3. Pull out all of Components and reconnect.
4. And I did everything.
There is another issue with BIOS 1701. You can't go back to previous BIOS in the BIOS Menu. You have to use BIOS FlashBack button if you want to go back to previous BIOS.
This company ASUS doesn't even know what they make and what's going on. Are you kidding me?
There is another issue with BIOS 1801. It was hard and impossible to rollback with BIOS FlashBack.
After update 1402 to 1801. I had to try so many times to rollback. It worked only for 1701. It took so many times though. What's wrong with ASUS?
<Failed Rollbacks with BIOS FlashBack>
1402 >> 1801 >> 1701 : Works. I tried many times. But it works.
1701 >> 1601: Doesn't work.
1701 >> 1402: Doesn't work.
1701 >> rest of old firmware: Doesn't work.
I used over 20 USB drives. None of them works.
01-03-2023 12:13 AM
01-03-2023 11:26 PM
pitderbeste wrote:
Hi Retry,
As you know, I have the same problem and haven't found a solution yet.
Did you find a way to solve the problem?
It's a pity that nobody from Asus reports here and says something about it.
PiT
01-08-2023 09:33 AM
01-16-2023 02:01 AM
Retry wrote:
Issued BIOS Version: 1601, 1701.(1402 works fine)
Motherboard: Maximus XIII Apex Z590.
Booting Error message: "The computer case is open. Please make sure the computer case is closed properly
then press CTRL + ALT + DEL to continue.
Fatal Error"
This motherboard doesn't have anything about 'Case(Chassis) intrusion function'. There is no BIOS option for it. There is no Header for 'Intrusion' on the motherboard.
Nothing works to solve this issue. I did following things.
1. Clear CMOS with a jumper.
2. Clear CMOS with a battery.
3. Pull out all of Components and reconnect.
4. And I did everything.
There is another issue with BIOS 1701. You can't go back to previous BIOS in the BIOS Menu. You have to use BIOS Flash Back button if you want to go back to previous BIOS.
This company ASUS doesn't even know what they make and what's going on. Are you kidding me?
01-19-2023 06:07 AM
Johnips wrote:
Just reset the Bios. Problem solved.
01-19-2023 06:37 PM
02-17-2023 01:17 AM
timetoy wrote:
Same issue here. "The computer case is open. Please make sure the computer case is closed properly
then press CTRL + ALT + DEL to continue."
02-19-2023 07:34 PM
nobody7394 wrote:
Motherboard: Maximus XIII Z590 HERO
Issued BIOS Version: 1701
Error message: "The computer case is open.
Please make sure the computer case is closed properly then press CTRL + ALT + DEL to continue.
Fatal Error"
Solution for me:
I have disabled in BIOS this Setting: "ErP Ready"
(BIOS/ Advanced/ Advanced\APM Configuration /ErP Ready).
Problem solved, but now the lights from RAZER Deathader Elite don't turn off.