11-29-2019 08:13 PM
11-29-2019 09:29 PM
03-12-2020 03:44 AM
BigJohnny wrote:
You can flash the BIOS with an empty socket and just power to the board. Dont even need ram or GPU. PSU on (dont try tol start machine), BIOS loaded onto suitable USB drive and named correctly with that and only that on the USB stick. Not sure what the naming is for the sage but example the Rampage VI Extreme has to be named R6E.CAP. I think its WSXTG.CAP for you but could be wrong. The rest are easy to figure out but that one is a bit different.
Then just put the USB stick in the USB port on the I/O labeled BIOS then press and hold the BIOS flashback button until it starts flashing then let go and it will start the flash. Takes a minute or two. If it flashes a few times then quits there is an issue like wrong name, bad file or plugged into the wrong port.
03-18-2020 05:44 AM
03-18-2020 05:55 AM
BigJohnny wrote:
You can flash the BIOS with an empty socket and just power to the board. Dont even need ram or GPU. PSU on (dont try tol start machine), BIOS loaded onto suitable USB drive and named correctly with that and only that on the USB stick. Not sure what the naming is for the sage but example the Rampage VI Extreme has to be named R6E.CAP. I think its WSXTG.CAP for you but could be wrong. The rest are easy to figure out but that one is a bit different.
Then just put the USB stick in the USB port on the I/O labeled BIOS then press and hold the BIOS flashback button until it starts flashing then let go and it will start the flash. Takes a minute or two. If it flashes a few times then quits there is an issue like wrong name, bad file or plugged into the wrong port.
03-26-2020 02:40 AM