Original Configuration - Boot from SSD plugged into SATA. Optane Disabled, CSM Enabled
Desired Configuration - Dual NVMe in RAID0 configured directly from MaximusIX Bios configuration to become the new boot drive.
PROBLEM: After reconfiguring BIOS to Intel Optane and enabling NVMe Slot 1/2 as active, disabling CSM Compatibility, which it says is required to RAID0 both NVME slots as bootable, it disables access to the original SATA to boot, so i can initiate a drive clone from my current boot partition to the new NVMe RAID. Disabling Intel Optane to gain access to SATA drive for boot access, removes access to the RAID0.
*How do i keep RAID0 as an accessible drive WHILE being able to boot from the SATA SSD, so i can clone over my primary partition from the SATA SSD to the new RAID0 NVMe m.2 pair. *
*SIDENOTE: In the back and forth, the original SSD, though no data has been lost, it is no longer bootable. DISM Repair is required to reassign it as a bootdrive so i can boot and do a drive clone. Original partition still exists and is accessible from Windows 10 File Explorer. *Just need to repair the MBR assignment in the BIOS so i can boot from it again.*
UGHHHHHH please help!!*