Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Booting from device connected to Thunderbolt port?

Looking into picking up a board with Thunderbolt ports. Maybe the Z690-i.If I connect a Thunderbolt dock to one of those ports then a bootable Win11 install drive or Windows OTG drive to the dock, will the motherboard be able to boot from it?

Z690 Maximus Hero and GSkill Trident Z5 6000 CL 36

I recently installed 4 sticks of G.Skill Trident Z5 6000 CL36 (6000U3636E16GX2) into my Z690 Maximus Hero board. The RAM runs fine and the system is stable at 4800 using no XMP settings, but when I try to switch to either XMP I or II, the system fail...

Will M.2 Drives for RAID kill GPU speed?

I am considering getting some smaller M.2 drives to run as a RAID for my OS. I have been more than fine with 500GB using SATA RAID drives but don't want to go over 1TB. I am running the Intel i9 11900k CPU. So here is the question. I see tha...

Maximus XIII Hero - Extremely slow to post.

Greetings, I have the Maximux XIII loaded up with an Intel I9 11th Gen 11,900K, 64 GB RAM, using the onboard Intel UHD Graphics 750 till Nvidia RTX cards return to MSRP prices. For the most part the system runs well except for a few graphics card p...

ASUS G752VT Touchpad firmware problem

hello,I had a touchpad problem where my touchpad would not do double finger gestures, I went to this github link https://github.com/nv30/asus_g752_linux and downloaded and flashed the touchpad firmware. now it is not showing on my device manager and ...

stilkus by Level 7
  • 503 Views
  • 0 replies
  • 0 kudos

ASUS FX553VD-E4082 broken ELAN1200 touchpad firmware.

Hello all!Recently I had problems on my touchpad with linux, and I found some solution which was linking to this post: https://rog.asus.com/forum/showthread.php?93405-G-752-VS-Touchpad-Gesture-FixI don't know what was I thinking about when I pressed ...

z690 motheborad and Rog Ryujin 360 Fitting Question

Hello to all of you.A week ago i purchaced a z690 Maximus Extreme motheborad with an intel cpu 12th gen lga1700. Also bought a Rog ryujin 360 cpu cooler. I was wondering if the cooler will fit on my motheboard. On the manual says that my motheboard s...

Tsou88 by Level 7
  • 1277 Views
  • 3 replies
  • 0 kudos

AX88U Firmware Issues

Warning!! Whomever uses AX88U routers in iMesh configuration, DO NOT update to the latest firmware Version 3.0.0.4.386.48631, It will completely destroy your Nod(s) connection(s).Last night after updating both, my router AX88U and Nods (same router...