Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Asus Z270H - BIOS loads to black screen

Hello all I have an issue with my Asus Z270H motherboard.When I boot into BIOS all I get is black screen.I took CMOS battery out to reset it and it loaded fine, I restarted the PC, tried again and got the black screen. Any idea what is going on?

Adata XPG SX8200 Pro Compatibility with Maximus Hero IC

Hello: I recently installed an ADATA XPG SX8200 Pro 1TB into my Maximus Hero IX motherboard, replacing my prior SSD sata bot drive. *At boot I set the bios settings to x4 as instructed at boot for the M.2 drive. *The drive works fine but it benchmark...

shiney by Level 8
  • 6738 Views
  • 1 replies
  • 0 kudos

problemes with boot menu set up

I just build a new computer with asus rog maximus and intel 9900k,computer is lightly OC to run at 4.8 ghz and it is working finebut my problem is that I dont get a boot menu with both disk they are samsung 970 evopluss,both disks can bee seen in dis...

How do I get a 3D display?

One of the reasons I bought my Asus ROG laptop was the Blu-Ray drive, which I wanted to use to play movies without having to cross the room to my hardware player (as I have mobility problems, doing that is quite literally a pain). Unfortunately, no p...

Asus Prime z390

Hello all am new here,Need some help. I just got my second board in a few days ago (z390-a) and I still cannot get Windows to install. I have tried everything at this point. It will BSOD on every attempt to install Win 10. I wish I could do Win 7...

BlazeX by Level 7
  • 1197 Views
  • 1 replies
  • 0 kudos

Pcie lane usage with dual gpu and x4 nvme drives

HelloI am trying to figure out if I will be able to run 2 2080 ti in sli in x16/x16 config with 3 nvme drives (each at x4) , I would like to add a 4th nvme drive sometime in the future if possible My setup is a somewhat new build :9980xeAsus rampa...