1. Before installing or removing the ROG GEN-Z.2 card, make sure the ATX is powered off or the power cord is disconnected from the power source. Failure to do so could result in serious damage to the motherboard ROG GEN-Z.2 card.
2. If the fan cable is connected to the CPU_OPT and/or AIO_PUMP headers, make sure to remove the fan cable before installing the ROG GEN-Z.2 card.Install the fan cable after installing the ROG GEN-Z.2 card.
3. When using the ROG GEN-Z.2 heat sink module, it is recommended to remove the original heat sink module of the M.2 SSD before installing the ROG GEN-Z.2
How does ROG GEN-Z.2 CARD determine whether the M.2 SSD is successfully installed
After the motherboard is powered on, press F2 to enter BIOS, then press F7 to enter EZ-MODE, you can quickly check the number of hard disks currently installed on the motherboard You can see that the M.2 hard disk specifications are installed in each slot of GEN-Z.2_1/2, which means the installation is successful