[FIRMWARE] Intel ME (B560/H570/Z590)

[MoKiChU]

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 15.0.42.2384 [08/01/2023]
PMC Firmware : 150.2.10.1020 [17/02/2022]
PCHC Firmware : 15.0.0.1021 [28/04/2021]
PHY Firmware : 12.14.215.2015 [25/08/2021]
Download : Link

Check/Update Process :

Check current version : Right click on "Check.cmd" > Run as administrator

Install/Update : Right click on "Install.cmd" > Run as administrator > Automatic restart when install is done

OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Motherboards with Intel B560/H570/Z590 chipset.

[MoKiChU]

Hi,

What issue are you talking about ? You have the 15.0.30.1692 version currently installed.

I think you have a hard time understanding what is displayed in front of you :



Circled in red : Intel ME Firmware Update Tool version currently used.
Circled in green : Intel ME Firmware version currently installed.

Note that you can also have this information in another way besides :

- Main tab of your BIOS/UEFI.
- Firmware tab in the Properties of your Intel MEI drivers.

[74lobster]

MoKiChU wrote:
Hi,

What issue are you talking about ? You have the 15.0.30.1692 version currently installed.

I think you have a hard time understanding what is displayed in front of you :



Circled in red : Intel ME Firmware Update Tool version currently used.
Circled in green : Intel ME Firmware version currently installed.

Note that you can also have this information in another way besides :

- Main tab of your BIOS/UEFI.
- Firmware tab in the Properties of your Intel MEI drivers.

Yeah, you right.

Thanks

[pitderbeste]

Hello All,

After the ME firmware update: 15.0.30.1692 I have a loss of performance.
Usually I use XMP mode for my memory but after the update of the ME FW the CPU clocks down under load.

I tried a downgrade to 15.0.21.1549 but that probably doesn't work. (Which I would actually prefer.)

Now I have tested a little and have seen that when I enter Auto in the AI Overclock Tuner it goes "normal" again
But why doesn't XMP1 / XMP2 or Manuel work anymore? I would prefer XMP, but then I have a loss of performance.

What is set with "auto"? can I enter these settings in Manual mode or XMP mode?

while cinebench is running:

XMP-Mode / Manual-Mode -> The temperature never goes above 70-75 degrees



Auto-Mode

[Ataemonus]

Manuel mode, trololol.

[pitderbeste]

Ataemonus wrote:
Manuel mode, trololol.

But in Manual-Mode i have only 4700 all Core, what do I have to set in order to get to the values of auto mode?

[Ataemonus]

It is called MANUAL mode, for f's sake, as in you set it manually, dooh. Manuel is the name of a male pornstar and many other males.

[pitderbeste]

ok i changed that, is there any constructive information?

not all are native speakers of English....

[blukas69]

Ataemonus wrote:
It is called MANUAL mode, for f's sake, as in you set it manually, dooh. Manuel is the name of a male pornstar and many other males.

for f's sake lol

[Ataemonus]

Nor am I, a native English speaker that. And if you think me teaching you to spell is not constructive information....good luck to you and all that.

[MoKiChU]

georgiadis wrote:
Hey guys, lots of work done here...thanks for your effort...just to be reassured....what is the latest firmware for my ROG STRIX Z590-E GAMING WIFI? Is there any changelog somewhere? 15.0.22.1622 or 15.0.30.1692 ?

Hi,

The latest is always in the first post of the thread (to date, it is 15.0.30.1692).