01-15-2023 11:25 PM - last edited Friday
Hi everyone,
- Intel Chipset Drivers :
Install/Update Process :
Launch "CHIPSET_Intel_vxx.x.xxxxx.xxxx.exe"
- Intel MEI Drivers (Drivers Only) :
Install/Update Process :
Launch "Install.cmd" by right-click Run as admin > Restart your PC when the command prompt window disappears
- Intel VMD Drivers (Drivers Only) :
Install/Update Process :
- Press Windows key + X > Device Manager > Right-click on your Intel VMD device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (VMD_Intel_v...) > Next
- Intel Serial IO Drivers (Drivers Only) :
Install/Update Process :
Launch "Install.cmd" by right-click Run as admin > Restart your PC when the command prompt window disappears
- Intel GNA Drivers (Drivers Only) :
Install/Update Process :
- Press Windows key + X > Device Manager > Right-click on your Intel GNA device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (GNA_Intel_v...) > Next
- Intel DTT Drivers (Drivers Only) :
Install/Update Process :
Launch "Install.cmd" by right-click Run as admin > Restart your PC when the command prompt window disappears
- Intel HID Drivers (Drivers Only) :
Install/Update Process :
- Press Windows key + X > Device Manager > Right-click on your Intel HID device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (HID_Intel_v...) > Next
- Intel PMT Drivers (Drivers Only) :
Install/Update Process :
- Press Windows key + X > Device Manager > Right-click on your Intel PMT device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (PMT_Intel_v...) > Next
OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Motherboards with Intel 6xx/7xx/8xx series chipsets.
TIPS :
If you want to manage the drivers (remove old/unused drivers for example) that you have in your Windows DriverStore
Use Driver Store Explorer (Right click on "Rapr.exe" > Run as administrator).
If you want better interrupts delivery latency
Enable MSI (Message Signaled-based Interrupts) mode on all your supported devices (see the column "supported modes") with
MSI Mode Utility (Right click on "MSI_Mode_Utility_v3.exe" > Run as administrator).
04-07-2023 06:41 AM - edited 04-07-2023 06:43 AM
Hey MoKiChU
These are my current versions, is that update route ok? what kind of improvements these do? I will try to find release notes later.
Current BIOS 0812
Current Firmware 16.1.25.2020v2 >>> Update 16.1.25.2124
Current Chipset Driver 10.1.19199.8340 >>> Update 10.1.19444.8378
Current MEI Driver 2230.3.19.0 >>> Update 2251.4.2.0
About VMD 19.5.4.1051, I am not sure if I have it installed. Should I install it?
Thanks!
05-17-2023 08:46 AM - edited 05-17-2023 08:47 AM
HI boss. I see that asus push a Intel Management Engine Interface V2251.4.2.0(SW 2306.4.10.0) 2023/05/11 is a change or a add of the same as the one we use with you.?
05-17-2023 09:58 AM
@MoKiChU where id the usb audio z690/z790 go to ? are they over at windows 10 forums again ?
05-27-2023 12:19 AM - edited 06-30-2023 12:44 AM
Hi everyone,
- Intel MEI Drivers (Drivers Only) :
Thread updated.
05-27-2023 12:29 PM
Thanks boss
06-17-2023 05:21 PM
Hi,
It’s my first computer that I’ve build and my mother board is z790 apex and my processor is intel 13900k so far as I read your previous replies before updating bios we have to update me but before that be have to update mei drivers sorry for asking it (you have probably answered it million times but can you give me a full update list in order (this is my 2nd z790 apex first one had issues and they replaced it I don’t want to screw it up this time)
thanks in advance
04-17-2024 11:54 AM - edited 04-17-2024 11:55 AM
Hello MoKiChU
I have a question
Is the RGB also linked to the drivers or is it independent of what you share?
Because I have a problem, the components are connected to the AURA except the GPU and when I open a game that changes the RGB colors they all take the color of the game but when I exit the game they all return to the AURA function except the GPU since it has a defined RGB sequence for the same reasons it comes with, then only the GPU stops lighting and its RGB turns off, I must enter the ARMORY CRATE program and hit reset to turn its RGB back on.
If you know something, I can gladly offer you more information.