[DRIVERS] Intel Chipset/MEI/SATA (1xx/2xx/3xx/4xx/5xx)

[MoKiChU]

Hi everyone,

- Intel Chipset Drivers :

Package : 10.1.19502.8391 WHQL [25/05/2023]

Download : Link

Install/Update Process :

Launch "CHIPSET_Intel_vxx.x.xxxxx.xxxx.exe"

- Intel MEI Drivers (Drivers Only) :

Drivers : 2316.5.0.0 WHQL [18/04/2023]

DAL SoftwareComponent Driver : 1.44.2023.710 WHQL [11/07/2023]
ICLS SoftwareComponent Driver : 1.67.548.0 WHQL [05/06/2023]
WMI SoftwareComponent Driver : 2318.4.3.0 WHQL [04/05/2023]

Download : Link

Install/Update Process :

Launch "Install.cmd" by right-click Run as admin > Automatic restart when install is done

- Intel SATA AHCI-RAID Drivers (Drivers Only) :

Drivers - 4xx/5xx : 18.37.7.1013 WHQL [06/02/2023]
Drivers - 2xx/3xx : 17.11.3.1010 WHQL [25/11/2022]
Drivers - 1xx : 16.8.5.1014 WHQL [13/12/2022]
Download - 4xx/5xx : Link
Download - 2xx/3xx : Link
Download - 1xx : Link

Install/Update Process :

- Press Windows key + X > Device Manager > Right-click on your Intel SATA device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (SATA_AHCI-RAID_Intel_v...) > Next

OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Motherboards with Intel 1xx/2xx/3xx/4xx/5xx series chipsets (except Intel X299 chipset).

TIPS :

If you want to manage the drivers (remove old/unused drivers for example) that you have in your Windows DriverStore
Use Driver Store Explorer (Right click on "Rapr.exe" > Run as administrator).

If you want better interrupts delivery latency
Enable MSI (Message Signaled-based Interrupts) mode on all your supported devices (see the column "supported modes") with
MSI Mode Utility (Right click on "MSI_Mode_Utility_v3.exe" > Run as administrator).

[MoKiChU]

Hi everyone,

- Intel SATA AHCI-RAID Drivers (Drivers Only) :

Drivers - 4xx/5xx : 18.37.1.1003 WHQL [13/01/2022]
Download - 4xx/5xx : Link

Thread updated.

[Ataemonus]

Thank you.

[Ataemonus]

Thank you so much.

[Mr_F1r3]

I notice that every time I update the BIOS, the Intel ME firmware version remains the same (even if in the change log they say they have updated it ...),how is it possible?

[MoKiChU]

tropicoco wrote:
Hi
I was on Windows 11 already with this setup. I destroyed the existing RAID partition to make a fresh install.
But I can't see my RAID0 (stripe) drive in Windows 11 installer (Media Creation Tool -> USB).
The driver loads but the drive doesn't show up.
My hardware setup:

• ASUS HERO XI Wi-Fi Z390
  
• ASUS HYPER M.2
  
• 2 x Intel 760p 512GB
  
• RAID Setup OK in BIOS
  
• 
  

Should I try to install Windows 10 first and upgrade to Windows 11 later?

Thank you for your help

Hi,

Check that you have CSM disabled (follow the instructions in this thread) : [INFORMATION] Windows 11 : Get Ready

Then the process to create RAID is the same as for Windows 10 : https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/ROG_MAXIMUS_XI_EXTREME/E14794_RAID_Configuration_Guide...

[tropicoco]

MoKiChU wrote:
Hi,

Check that you have CSM disabled (follow the instructions in this thread) : [INFORMATION] Windows 11 : Get Ready

Then the process to create RAID is the same as for Windows 10 : https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/ROG_MAXIMUS_XI_EXTREME/E14794_RAID_Configuration_Guide...

SOLVED!
Thank you for your quick answer.
I had to unplug all my SATA HDD and then the RAID0 drive did show up.

Thanks again for your help!

[MoKiChU]

Hi everyone,

- Intel Chipset Drivers :

Package : 10.1.19041.8307 WHQL [18/02/2022]
Download : Link

Thread updated.

[rgen44]

MoKiChU wrote:
Hi everyone,

- Intel Chipset Drivers :

Package : 10.1.19041.8307 WHQL [18/02/2022]
Download : Link

Thread updated.

As always, Thank you @MoKiChU. You are appreciated. STAY WELL!

[MoKiChU]

Hi everyone,

- Intel VMD Drivers (Drivers Only) :

Drivers - 6xx/7xx : 19.2.1.1006 WHQL [14/02/2022]
Download - 6xx/7xx : Link

Thread updated.

[bigjohns97]

MoKiChU wrote:
Hi everyone,

- Intel VMD Drivers (Drivers Only) :

Drivers - 6xx/7xx : 19.2.1.1006 WHQL [14/02/2022]
Download - 6xx/7xx : Link

Thread updated.

Thanks MoKiChU!

I noticed these didn't come with the admin install script, I am guessing I just need to apply these to the two Intel RST VMD devices under the storage controllers section in device manager?