Armory Create 5.2.12.0

[Rolda]

This is really funny (or crying?)
What a bunch of amateurs.



Why is there no space after the number? It's confusing.


Why aren't more temperatures monitored?
Why only GPU Memory Temp. etc.


Why is the PWM of the GPU fan being monitored? On top of that, the value has the wrong unit. It should be in % not RPM. And again without a space after the number.


Voltage in MHz?!?!
I have no words.

[Nate152]

Hi Rolda,

The MHZ shouldn't have a space between it and the numbers, and I prefer they don't have a space.

The PWM reading is showing fan speed.

There are more temperatures being monitored, click the red arrow and scroll.

The only issue I see is your last screenshot with the voltages being read in MHz.

[ahfoo]

Nate152 was correct. number following by MHz should not have any space in between. But not in some country required space in writing in thesis just like my prof once.

[Rolda]

In my country (Czech Republic), the space between the number and the units is written. Since the installation of the language mutation is automatic, it should be fixed for the Czech language. Example: 3600 MHz, 1.2 V, 920 RPM
The only exception is °C. Do not write a space after the number. (20°C)
I don't really have more temperatures than in my picture.
RAM doesn't have a temperature sensor but GPU does, so why does it only show GPU memory?
FANPWMIN0 is the percentages of PWM regulation of the GPU fan, therefore the unit cannot be RPM but %. But I don't think it needs to be monitored.