strange, well if i use the auto settings on 3200 (not the docp) i get something like 22/22/22 -still crashes, voltage on auto, will try a little bit more but there is something else i just saw, the Trdwr setting in the vram menu in the bios. it differs from each bank by 1 digit always, 10/9 or12/11 .. has this something to do with a 'natrual' timing delay cause of circut design maybe? aka one stick is closer to the action ? ^^
The top m.2 slot is bound directly to the cpu and talks to it, the 2nd m.2 slot is hooked up to the chipset (where there is no more fan), and than starts talking to the cpu, this can cause bandwidth issues i think, when connecting tonns' of peref. to the board aka usb etc. so i would prefer to start using m.2 deices at the top slot M1, first thing. iits downards comp. to pcie 3.0 of course.
Orwell was an optimist
